Subscribe

REPAIR · August 9, 2026

Roof Washing Cost (2026): By Method, Size, and Roof Type

Roof washing costs $0.05 to $0.75 per sq ft, about $250 to $1,300 total. Compare 2026 soft wash vs pressure wash pricing by roof type and size.

By The Roofing Brief Team. Last reviewed: October 2026.

Roof washing cost runs about $0.05 to $0.75 per square foot, or roughly $250 to $1,300 for a typical single-family home, with the exact price set by the cleaning method your roof needs. This Old House puts the average at $675 for a 1,500 square foot home (updated March 2026), Fixr at $612 (updated January 2025), and Angi’s 2026 guide gives a typical range of $296 to $626. The single biggest cost lever is method: a low-pressure soft wash on asphalt shingles costs more per square foot than a chemical wash on a flat rubber roof, and pressure washing asphalt shingles is something the shingle industry tells you not to do at all.

How much does roof washing cost?

Roof washing costs $0.05 to $0.75 per square foot depending on method, which works out to roughly $250 to $1,300 for most homes and a national average near $600 to $675 (Fixr; This Old House). Debris blowing sits at the cheap end and a full soft wash sits at the top. The table shows the per-method rates from both sources.

Cleaning method Fixr cost per sq ft This Old House cost per sq ft Typical use
Leaf blowing / debris only $0.05 to $0.10 $0.05 to $0.10 Loose debris, pre-clean step
Zinc oxide treatment $0.05 to $0.15 Not listed Preventive coating after cleaning
Chemical wash (no pressure) $0.20 to $0.30 $0.20 to $0.30 Flat, rubber, tar and gravel roofs
High-pressure / power wash $0.20 to $0.70 $0.20 to $0.60 Metal and concrete only
Low-pressure wash $0.30 to $0.70 $0.30 to $0.70 Slate and wood shake
Soft wash $0.30 to $0.75 $0.30 to $0.75 Asphalt shingle and tile

Sources: Fixr roof cleaning cost guide (updated January 31, 2025) and This Old House roof cleaning cost guide (updated March 31, 2026), checked October 2026.

Most homeowners never choose a method freely. Your roof material dictates it, and the method alone moves the price: at Fixr’s rates, a 2,000 square foot roof runs $400 at the low end of a chemical or power wash ($0.20 per sq ft) and $1,500 at the top of the soft wash range ($0.75 per sq ft).

Soft wash vs pressure wash: cost and which your roof needs

Soft washing costs $0.30 to $0.75 per square foot and pressure washing costs $0.20 to $0.70 (Fixr), but the cheaper method is not the better deal on most roofs. Soft wash uses low pressure plus a cleaning solution, typically sodium hypochlorite, that kills algae and moss rather than just blasting the surface. Pressure washing on shingles strips the protective granules. The Asphalt Roofing Manufacturers Association (ARMA) says in its algae and moss cleaning guidance: never use a pressure washer to clean an asphalt shingle roof, because it causes granule loss that can lead to early roof failure.

Factor Soft wash Pressure wash Source
Equipment Low-pressure sprayer, near garden-hose level Homewyse prices a 3,000+ PSI, 4 GPM gas washer Homewyse
Cost per square foot $0.30 to $0.75 $0.20 to $0.70 Fixr
Safe for asphalt shingle Yes, with the maker’s mix No: ARMA says never ARMA
Safe for metal and concrete Yes Yes Fixr; This Old House
Dwell time (bleach mix on shingles) 15 to 20 minutes Not applicable ARMA
Main risk Bleach runoff on plants and siding Granule loss, leaks, voided warranty ARMA

For soft wash pricing by roof type and moss severity, see our full soft wash roof cleaning cost guide.

Power washing roof cost

Power washing a roof costs about $0.39 to $0.49 per square foot on Homewyse’s pressure wash estimate, which includes labor, basic cleaning solution and a rented 3,000+ PSI washer but excludes repairs, sales tax and 13% to 22% general contractor overhead. Fixr’s range is wider at $0.20 to $0.70, This Old House’s $0.20 to $0.60, and Angi’s 2026 pressure-cleaning guide gives $200 to $1,200 per home with a $600 average. Power washing is a metal, concrete tile or masonry service; on asphalt shingles, ARMA says not to use it.

If your roof is Use Rate per sq ft Worked cost on 1,677 sq ft
Asphalt shingle Soft wash, ARMA 1:1 bleach and water, 15 to 20 minute dwell $0.30 to $0.75 (Fixr) $503 to $1,258
Metal or concrete tile Power wash or soft wash $0.39 to $0.49 (Homewyse) $654 to $822
Slate or wood shake Low-pressure wash $0.30 to $0.70 (Fixr) $503 to $1,174
Flat rubber, tar and gravel Chemical wash $0.20 to $0.30 (Fixr) $335 to $503
Curling, brittle or bald shingles Skip washing; price a repair or replacement Not applicable Not applicable

The worked example assumes a 1,500 square foot single-story footprint under a 6:12 roof. A 6:12 pitch multiplies plan area by 1.118 (the square root of 6 squared plus 12 squared, divided by 12), so the roof surface is about 1,677 square feet before overhangs.

Roof washing cost by roof type

Roof washing cost by roof type ranges from $0.20 per square foot for flat and metal roofs to $0.75 for asphalt shingle and tile on Fixr’s rates. The material sets both the safe method and the price, because delicate surfaces like clay tile and shingles need a gentler, more chemical-dependent soft wash while metal and concrete tolerate pressure.

Roof type Recommended method Cost per square foot
Asphalt shingle Soft wash $0.30 to $0.75
Concrete or clay tile Soft wash $0.30 to $0.75
Metal High-pressure or soft wash $0.20 to $0.70
Slate Low-pressure wash $0.30 to $0.70
Wood or cedar shake Low-pressure wash $0.30 to $0.70
Flat (rubber, tar and gravel) Chemical wash $0.20 to $0.30

Tile and slate carry a hidden cost beyond the per-foot rate: both are fragile to walk on. ARMA’s cleaning bulletin tells crews to work from a ladder or walkboards where possible, so ask whether a tile or slate quote includes walkboards and roof anchors.

Roof washing cost by roof size

Roof washing cost by size runs from about $100 for a 1,000 square foot roof to $2,700 for a 4,500 square foot roof, based on Fixr data (updated January 2025). Roof area is larger than the home’s footprint because of pitch and overhangs: a 6:12 pitch adds about 11.8% and a 12:12 pitch about 41.4% to the plan area.

Roof area Fixr total cost This Old House average
1,000 sq ft $100 to $600 $400
1,500 sq ft $150 to $900 $600
2,000 sq ft $200 to $1,200 $800
3,750 sq ft $375 to $2,250 Not listed
4,500 sq ft $450 to $2,700 Not listed

Two-story homes and steep pitches push the total up, as do heavy moss and difficult access, because they slow the crew and require more solution and safety setup. ARMA notes severe moss may take more than one bleach treatment, which a quote may price as a second visit.

Why roof washing cost varies by region and climate

Region drives roof washing cost mainly through how often you need it and how heavy the growth gets, not through a fixed regional price. ARMA’s algae discoloration bulletin says algae discoloration is most widespread in the Gulf States and along the Northwest and Eastern Seaboards, especially in warm, humid conditions. Our own roof algae and black streaks by region report maps where Gloeocapsa magma, the black-streak algae, hits hardest.

Region Main roof contaminant Effect on cost
Southeast and Gulf Coast Black-streak algae (Gloeocapsa magma) Higher: humid air drives frequent recleans
Pacific Northwest Moss and lichen Higher: thick moss adds removal labor
Northeast and Upper Midwest Algae and moss on shaded slopes Moderate
Southwest and arid West Dust and light algae Lower: least frequent cleaning

Where moss is thick, expect a manual removal step before washing. Our roof moss removal cost guide breaks down that added labor, which is why Pacific Northwest quotes often top a same-size job in a dry climate.

What the roof washing process looks like

A professional soft wash follows a repeatable sequence. Use the 7 steps as a checklist: a low quote that skips step 2 or step 4 is cutting the part that protects your landscaping or actually kills the growth.

  1. Inspect and identify the roof material to set the safe method and pressure.
  2. Protect the property by wetting down plants, covering delicate landscaping, and shielding gutters and downspouts.
  3. Apply the cleaning solution at low pressure. ARMA’s typical mix for asphalt shingles is one part liquid chlorine bleach (sodium hypochlorite) to one part water, unless the shingle maker specifies otherwise.
  4. Let it dwell so it kills algae and moss rather than just rinsing the surface. For a bleach solution on asphalt shingles, ARMA’s technical bulletin says at least 15 and no more than 20 minutes.
  5. Rinse at low pressure to carry away dead growth without stripping granules.
  6. Apply a preventive treatment to slow regrowth, if included and approved by your shingle maker. ARMA does not recommend adding zinc or copper strips to an existing shingle roof, because exposed nails can leak over time and breaking the shingle sealant bond can lead to wind damage.
  7. Final inspection and cleanup of runoff and debris.

DIY vs professional roof washing cost

DIY roof washing costs only the materials, a pump sprayer, household bleach and safety gear, versus $150 to $900 for a pro on a 1,500 square foot roof (Fixr), but the savings come with fall risk and warranty exposure. ARMA warns that the bleach application and rinse make the roof surface slippery, and mixing the solution stronger than 1:1 can bleach siding or kill plants.

Factor DIY Professional
Out-of-pocket cost Sprayer, bleach, gloves, eye protection $150 to $900 per job on 1,500 sq ft (Fixr)
Solution ARMA 1:1 bleach and water, 15 to 20 minute dwell Maker-approved soft wash mix
Main risk Falls on a slippery roof, wrong mix, warranty voids Covered by the contractor’s insurance
Results Depend on technique Method matched to roof material

For a DIY pass, product choice matters. Our picks in best roof cleaner and, for heavy growth, best roof moss killer cover the solutions pros and homeowners rely on. For the method itself, including each shingle maker’s published mix and dwell time, see our guide on how to clean an asphalt shingle roof yourself.

Is roof washing worth the cost?

Roof washing is usually worth the cost when the roof has life left, because algae and moss damage shingles and washing costs a fraction of a replacement. Moss lifts shingle edges and traps moisture against the deck, and ARMA warns that cleaning is temporary and algae discoloration will likely recur. At $600 to $675 per wash (Fixr; This Old House) against a replacement priced in the thousands, a wash every few years is cheap upkeep for a sound roof.

The exception is a roof near the end of its service life. If shingles are already curling, brittle, or losing granules across the field, washing at $0.30 to $0.75 per square foot will not reverse that damage and the money is better put toward replacement.

Frequently asked questions

How much does it cost to wash a roof?

Washing a roof costs about $0.05 to $0.75 per square foot, or roughly $250 to $1,300 for a typical home. This Old House puts the average at $675 for a 1,500 square foot home (March 2026), Fixr at $612, and Angi’s 2026 range is $296 to $626. Method sets the rate: debris blowing is cheapest, and a full soft wash of asphalt shingles sits at the top of the range.

What is the difference between soft washing and pressure washing a roof?

Soft washing uses low pressure plus a cleaning solution, typically a 1:1 bleach and water mix left for 15 to 20 minutes on asphalt shingles, that kills algae and moss. Pressure washing uses a high-pressure washer (Homewyse prices a 3,000+ PSI unit) and blasts the surface clean. On asphalt shingles, high pressure strips protective granules, which is why ARMA says never to pressure wash them. Pressure washing is reserved mainly for metal and concrete.

How much does it cost to power wash a roof?

Power washing a roof costs about $0.39 to $0.49 per square foot on Homewyse’s estimate, $0.20 to $0.70 on Fixr’s, and Angi’s 2026 guide puts most homes at $200 to $1,200 with a $600 average. On a 1,677 square foot roof, Homewyse’s rate works out to about $654 to $822. Use it only on metal, concrete tile or masonry, not on asphalt shingles.

Can you pressure wash an asphalt shingle roof?

You should not pressure wash an asphalt shingle roof. The high pressure dislodges the granules that protect shingles from UV and weather, which shortens roof life and can void the manufacturer warranty. The Asphalt Roofing Manufacturers Association says never to use a pressure washer on asphalt shingles. Soft washing at low pressure is the recommended method for shingles.

How often should you wash your roof?

Cleaning guides commonly suggest every few years, and humid and shaded climates that grow algae and moss faster may need it more often. ARMA warns that cleaning is temporary and algae discoloration will likely recur. Signs it is time include black streaks, green moss patches, or lichen spots. ARMA does not recommend adding zinc or copper strips to an existing shingle roof, because exposed nails can leak over time and breaking the shingle sealant bond can lead to wind damage.

Does roof washing damage shingles or void the warranty?

Soft washing with the shingle maker’s approved mix does not damage shingles when done correctly, because it uses low pressure. Pressure washing can strip granules, which is why ARMA warns against it on asphalt and says other cleaning chemicals or methods should not be used without the shingle maker’s approval. Confirm the contractor uses a soft wash on shingles and tile, and check your warranty language before any high-pressure cleaning.

Is professional roof washing cheaper than DIY?

DIY roof washing is cheaper, since you pay only for a sprayer, bleach and safety gear versus $150 to $900 for a pro on a 1,500 square foot roof (Fixr), but it carries fall risk on a surface ARMA warns turns slippery during treatment. Professionals are insured and match the method to your roof. For steep, two-story, or heavily contaminated roofs, hiring a pro is the safer value.