By The Roofing Brief Team. Last reviewed: October 2026.
What is aluminum shake roofing?
Aluminum shake roofing is a stamped aluminum roofing system shaped to mimic hand-split cedar shakes, sold as interlocking panels or individual shingles rather than long standing seam panels. It uses a rust-proof metal, installs at about 46 to 58 pounds per square (0.46 to 0.58 lb per sq ft) across the three main brands, costs $6.70 to $16.00 per sq ft installed per HomeGuide’s metal shingle cost guide, and is marketed as a lifetime roof for homeowners who want the cedar look without the rot, insect, or fire risk of real wood.
The profile is deep and textured, so from the ground it reads as wood shake. The substrate is aluminum alloy 3003 or 3105 sheet complying with ASTM B209: Classic’s Country Manor Shake is 0.019 in 3105-H26 per ICC-ES report ESR-1360, and Interlock uses 0.028 in 3003-H24 or 3105-H24. This sits inside the wider family of shake style metal roofing, which also includes steel and stone-coated steel versions covered in our shake style metal roofing guide.
Most aluminum shake products carry a factory PVDF (Kynar 500 type) finish: ESR-1360 specifies a 0.0008 in PVDF coat over a 0.0002 in primer on Classic panels, and Interlock’s Alunar coating is a 70% PVDF system warranted 30 years against chalk and fade. Warranties run from transferable lifetime limited to 50 years. ESR-1360 allows Classic panels over existing asphalt shingles, wood shingles or medium shakes on solid sheathing at 3:12 or steeper, subject to IRC R908, which bars a new covering over two or more existing layers.
How much does aluminum shake roofing cost?
Aluminum shake roofing typically costs about $6.70 to $16.00 per square foot installed, or $670 to $1,600 per roofing square (100 square feet), with $3.25 to $6.50 per sq ft of that for material alone, per HomeGuide’s aluminum shingle figures. Heavier interlocking systems tend to price toward the top of that range. Aluminum runs higher than steel: the same HomeGuide table gives $600 to $1,300 per square installed for steel shingles and $720 to $1,280 for stone-coated steel, and HomeGuide’s metal roof cost guide puts aluminum roofing overall at $700 to $1,700 per square installed.
A roofing square covers 100 square feet of roof area, not floor area. A typical 1,800 square foot home has roughly 20 to 25 squares of roof once pitch is added, so a full aluminum shake roof works out to about $13,400 (20 squares x $670) to $40,000 (25 squares x $1,600) installed at HomeGuide’s per-square range.
| Line item | Typical 2026 range (HomeGuide aluminum shingle figures) |
|---|---|
| Aluminum shake material only | $3.25 to $6.50 per sq ft |
| Installed (material plus labor) | $6.70 to $16.00 per sq ft |
| Per roofing square, installed | $670 to $1,600 |
| Full roof, 20 to 25 squares | $13,400 to $40,000 |
| Tear-off of old shingles, if needed | $1 to $3 per sq ft (HomeGuide) |
Three line items move an aluminum shake bid most: tear-off at $1 to $3 per sq ft (skipped when ESR-1360 allows installing over one existing shingle layer), the fire-rated underlayment the brand’s Class A listing requires, and pitch, since installation below 4:12 calls for ice-and-water underlayment on Interlock. Aluminum shake is a specialty install, so labor can carry a premium in areas with few brand-trained crews.
Aluminum shake roofing brands compared
The main aluminum shake brands are Classic Metal Roofing Systems (Country Manor Shake), Reinke Shakes, and Interlock Roofing. They differ mostly in aluminum gauge (0.019 to 0.028 in), installed weight (46 to 58 lb per square), and warranty structure. Thicker gauge resists denting and foot traffic better. Steel-based shakes like DECRA and ProVia are a separate category and are not aluminum.
| Product | Aluminum gauge | Weight per square | Recycled content | Warranty | Notable rating | Source |
|---|---|---|---|---|---|---|
| Classic Country Manor Shake | .019 in, 3105-H26 (valley flashing .024 min) | 47 lb (0.47 psf) | 95% post-consumer | Transferable lifetime limited | 120 mph; UL 580 uplift tested to simulated 200+ mph; Class A over 2 layers of ASTM D3909 cap sheet | Classic product page; ESR-1360 |
| Reinke Shakes (LT, current) | Legacy 1976 to 2019 shingle: .020 embossed to .025, 3003/3105 | 46 lb (legacy data) | 99% recycled | Lifetime against leakage from wind and hail (LT); legacy: 50-yr transferable, 120 mph, 1.5 in hail | UL 2218 Class 4; can be installed to UL Class A | Reinke technical data and home page |
| Interlock Metal Shake | .028 in, 3003-H24 or 3105-H24 | About 58 lb | Not stated on product page | Lifetime limited, non-prorated; one transfer ($300 fee); 30-yr coating | UL 2218 Class 4; ASTM D3161 Class F; 120 mph warranted; Class A with GAF VersaShield | Interlock product page; ESR-1790 |
Interlock uses the heaviest gauge at .028 inch and publishes a UL 2218 Class 4 rating, the top impact tier, tested with a 2-inch steel ball; Reinke Shakes also advertises UL 2218 Class IV for its current LT shingle, per its home page. Classic’s Country Manor Shake page lists hail resistance without naming a UL 2218 class, so ask for the test report if an insurer’s Class 4 credit matters. Classic’s .019 inch panels keep weight and cost down but are more prone to cosmetic denting from large hail. All three are recyclable aluminum. Per Reinke’s technical data, the legacy Reinke shingle needed 150 shingles, 450 nails (1-3/4 in ring shank) and 1-1/10 rolls of 18 in #15 felt per square.
Aluminum vs steel shake: which should you buy?
Aluminum shake wins near saltwater and where weight matters; steel shake wins on budget and in large-hail regions. Aluminum forms a self-healing oxide layer that resists salt corrosion, and HomeGuide calls aluminum among the most recommended roofing materials in coastal regions for that reason. Classic’s own steel shake shows the weight gap: ESR-1360 lists its KasselShake at No. 28 gauge (0.0165 in) G90 steel and 1.00 lb per sq ft installed, versus 0.47 lb for the aluminum Country Manor Shake. Steel costs less per square ($600 to $1,300 installed vs $670 to $1,600 for aluminum shingles, per HomeGuide).
| Factor | Aluminum shake | Steel shake (incl. stone-coated) |
|---|---|---|
| Coastal salt corrosion | Excellent, self-protecting oxide | Weaker; salt attacks galvanized/Galvalume over time |
| Weight | 46 to 58 lb per square (Reinke, Classic, Interlock) | About 100 lb per square (Classic KasselShake, ESR-1360) |
| Hail dent resistance | Softer, dents more from large hail | Harder, resists denting better |
| Installed cost | $6.70 to $16.00 per sq ft | $6 to $13 (steel); $7.20 to $12.80 (stone-coated), per HomeGuide |
| Rust | Cannot rust | Can rust if coating is breached |
For a full breakdown of the metal itself, see our guide to aluminum roofing and how it compares to steel. If your priority is the wood-shake look on a tight budget in a low-salt climate, a stone-coated steel shake at $720 to $1,280 per square installed delivers a similar profile for less.
Decision table: is aluminum shake the right roof?
| If your house or plan is | Choose | Why (source) |
|---|---|---|
| Coastal, salt spray reaches the roof | Aluminum shake | Cannot rust; Reinke notes salt-spray use as siding |
| Hail region with an insurer Class 4 credit | Interlock (.028 in) or Reinke LT, both UL 2218 Class 4 | Maker-published ratings; confirm the credit with your carrier |
| Wildfire area requiring a Class A roof | Any of the three, with the listed assembly | Classic: 2 layers ASTM D3909 cap sheet (ESR-1360); Interlock: GAF VersaShield, self-adhered underlayment is non-classified |
| Slope below 3:12 | Not a metal shingle roof; use standing seam | IRC R905.4.2 and ESR-1360 set 3:12 minimum |
| Slope 3:12 to under 4:12 | Aluminum shake with ice-and-water underlayment | Interlock: 3:12 with ice-and-water, 4:12 with standard underlayment |
| One existing shingle layer you want to keep | Classic over the old roof | ESR-1360 4.2.1 allows it on solid sheathing; IRC R908 bars it over 2 or more layers |
| Inland, budget first | Steel or stone-coated steel shake | $600 to $1,300 per square vs $670 to $1,600 (HomeGuide) |
How long does aluminum shake roofing last?
Aluminum shake roofing commonly lasts 40 to 70 years and is often sold as a lifetime roof, meaning it should outlast the ownership of most single-family homes. It does not rot, rust, or burn; Reinke lists a 50+ year life expectancy, and Interlock warrants its 70% PVDF finish for 30 years against chalking worse than ASTM D4214 rating 8 or color change over 5 Delta E (ASTM D2244). The main aging factor is cosmetic denting and finish wear, not structural failure.
Wind ratings run to 120 mph on interlocking systems: Classic’s Country Manor Shake is rated to 120 mph and passed UL 580 uplift testing at a simulated 200+ mph, and Interlock is warranted to 120 mph and tested to ASTM D3161 Class F. Interlock and Reinke both publish UL 2218 Class 4 impact ratings. A Class A fire rating depends on the assembly: ESR-1360 rates Classic panels Class C over ASTM D226 Type II felt, Class B over one layer of ASTM D3909 cap sheet, and Class A over two.
Corrosion is where aluminum earns its premium. Because it forms a stable oxide layer instead of rusting, it holds up in coastal and industrial air that degrades G90 galvanized steel. ESR-1360 still requires aluminum to be separated from dissimilar metals, concrete or masonry with bituminous paint, mastic or a layer of underlayment. Metal’s share of the U.S. reroof market is tracked in our roofing material market share report.
Pros and cons of aluminum shake roofing
Aluminum shake roofing trades a high upfront price ($670 to $1,600 per square installed) for a low-maintenance, long-life roof with strong coastal and fire performance. The main drawbacks are cost, dent risk from large hail on .019 inch panels, and a shortage of trained installers. It fits homeowners planning to stay long term or those in salt-air or wildfire zones.
- Pro: Rust-proof, which is why HomeGuide ranks aluminum among the top coastal choices.
- Pro: Very light, about 46 to 58 lbs per square, so it can go over many existing roofs and adds little structural load.
- Pro: Lifetime or 50-year transferable warranties and Class A fire ratings.
- Pro: Made from 95% to 99% recycled aluminum and fully recyclable.
- Con: High upfront cost: $6.70 to $16.00 per sq ft installed vs $5 to $8 for architectural asphalt.
- Con: Softer than steel, so very large hail can leave cosmetic dents.
- Con: Fewer certified installers, which can raise labor cost and lead time.
How is aluminum shake roofing installed?
Aluminum shake installs as interlocking panels or shingles fastened to the deck, working from the eave up so each course locks the one below. ESR-1360 sets the Classic details: minimum 15/32 in plywood or solid sheathing, ASTM D226 Type II felt (or the cap-sheet assembly for Class B or A), and Country Manor Shake panels nailed through the hem 12 in on center with 0.15 in screw-shank aluminum nails long enough to penetrate 1 in into the sheathing. Interlock calls for 1/2 in minimum sheathing, synthetic underlayment and concealed clips.
- Inspect the deck, replace rotted sheathing, and install the underlayment the brand’s fire listing names: two layers of ASTM D3909 cap sheet for Classic Class A, or GAF VersaShield for Interlock Class A. Interlock states that a self-adhered underlayment makes its assembly non-classified for fire.
- Set eave starter and drip edge, then flash valleys, chimneys, and pipe penetrations with matching aluminum trim; ESR-1360 requires valley flashing of at least 0.024 in aluminum and panel nails at least 9 in from the valley channel.
- Install the first course of shake panels at the eave, fastening through the concealed nailing flange.
- Work upward course by course, engaging the four-way interlock on each panel so wind and water are locked out.
- Cap the hips and ridge with the manufacturer’s formed ridge, then finish rake and headwall flashings.
Because the panels interlock, a bad cut or a skipped fastener can compromise the whole run. Before signing, ask the installer for the brand’s installation manual, the ICC-ES report number (ESR-1360 for Classic, ESR-1790 for Interlock), and which underlayment they will use for the fire class your jurisdiction requires.
Is aluminum shake roofing worth it?
Aluminum shake roofing is worth it for long-term owners in coastal, wildfire, or high-value homes where a lifetime, rust-proof, cedar-look roof justifies $670 to $1,600 per square. It is usually not worth the premium for a home you plan to sell within a few years, or in a dry inland market where steel shake at $600 to $1,300 per square delivers similar looks for less.
If the wood-shake aesthetic is the goal but budget is tight, compare it against synthetic cedar shake roofing, which mimics wood without the metal premium. Weigh aluminum against the full range of profiles in our metal roofing types overview before committing to a specialty system.
Frequently asked questions
Is aluminum shake roofing worth the cost?
Aluminum shake is worth it for owners staying long term, especially near saltwater or in wildfire zones, because it is rust-proof, can be installed as a Class A assembly, and is warranted for a lifetime or 50 years. For short-term owners or dry inland climates, steel shake at $600 to $1,300 per square installed (HomeGuide) delivers a similar look for less.
How much does an aluminum shake roof cost?
Expect about $6.70 to $16.00 per square foot installed, or $670 to $1,600 per roofing square, per HomeGuide’s aluminum shingle figures. A typical 1,800 square foot home with 20 to 25 roof squares runs about $13,400 to $40,000, plus $1 to $3 per sq ft if the old roof must be torn off.
Does aluminum shake roofing dent from hail?
Aluminum is softer than steel, so very large hail can leave cosmetic dents on lighter-gauge products. Interlock (.028 inch) and Reinke publish UL 2218 Class 4 ratings, the top impact tier, tested with a 2-inch steel ball. Reinke’s legacy 1976 to 2019 shingle carried a warranty against hail up to 1.5 inches, and Classic’s .019 inch Country Manor Shake page does not name a UL 2218 class.
Is aluminum or steel better for a shake roof?
Aluminum is better near saltwater because it cannot rust, and it weighs less: ESR-1360 lists Classic’s aluminum Country Manor Shake at 0.47 lb per sq ft versus 1.00 lb for its 28-gauge steel KasselShake. Steel is harder and cheaper, at $600 to $1,300 per square installed versus $670 to $1,600 for aluminum shingles (HomeGuide). Choose aluminum for coastal and weight-sensitive jobs, steel for budget and large-hail regions.
How long does an aluminum shake roof last?
Aluminum shake commonly lasts 40 to 70 years and is often sold as a lifetime roof; Reinke lists a 50+ year life expectancy. It does not rot, rust, or burn, and Interlock warrants its 70% PVDF finish for 30 years against fade and chalk. The usual aging sign is cosmetic denting or finish wear rather than leaks or structural failure.
Can you install aluminum shake over an existing roof?
Often yes. ESR-1360 allows Classic’s aluminum panels over existing asphalt shingles, wood shingles or medium wood shakes on solid sheathing at 3:12 or steeper, with ridge and hip caps removed and wood roofs covered first with an approved separation layer. IRC R908.3.1.1 bars any recover where two or more roof coverings already exist, so a second-layer roof must be torn off.