Subscribe

MATERIALS · July 17, 2026

Roof Bricks: What a Brick Roof Actually Is (and Isn’t)

Roof bricks are not a real roofing product. What a brick roof actually means, clay tile vs brick, and the best roof for a brick house.

By The Roofing Brief Team. Last reviewed: October 2026.

Roof bricks are not a standard roofing product. When people search for a brick roof, they usually mean one of three things: clay roof tiles (the fired clay cousin of a brick), the real bricks that cap a parapet or build a chimney, or the best roof to put on a brick house. The IRC lists clay and concrete tile as roof coverings under Section R905.3 but has no section for laid brick, and the Brick Industry Association designs anchored brick veneer around 40 psf, roughly four times a 1,025 lb per square clay tile roof.

What are roof bricks?

The term “roof bricks” mixes up two different fired clay products. A US modular brick is a solid walling unit measuring 3 5/8 by 2 1/4 by 7 5/8 inches, per the Brick Industry Association’s Technical Note 10, made to stack in mortar. A clay roof tile is a thin, shaped, interlocking unit made to shed water down a slope; Ludowici’s 13 in Spanish barrel tile, for example, runs 171 pieces and 900 lb per square, about 5.3 lb a piece. Both are baked clay, but only the tile is made to the clay roof tile standard, ASTM C1167.

The confusion comes from the shared raw material and the brick-red color of many terracotta roof tiles, which is why “brick tiled roof” usually means a red clay tile roof. A tile is curved or flanged and laps over the course below so water runs off; Eagle’s concrete field tile, for example, is laid with a 3 in headlap. A brick is thick, flat sided, and depends on a mortar joint at every edge, and on a slope each joint is a seam water can enter.

Brick vs clay roof tile vs concrete tile

A walling brick, a clay roof tile, and a concrete roof tile look related but perform very differently on a roof. The table compiles weights from maker data sheets; weights are per roofing square (100 square feet of covered roof).

Material Weight per square (100 sq ft) Product standard Minimum slope Source
Modular brick layer, 3 5/8 in About 4,000 lb (40 psf) ASTM C216 facing brick (walls) Not a roof covering in the IRC BIA Technical Note 28
Clay tile, Ludowici Spanish 13 in 900 lb ASTM C1167 Grade 1 4:12 (maker) Ludowici data sheet
Clay tile, Ludowici French interlocking 1,025 lb ASTM C1167 3:12 (maker) Ludowici French
Clay tile, Ludowici Flat Slab shingle tile 1,300 lb (3/8 in) to 2,000 lb (5/8 in) ASTM C1167 Maker’s install manual Ludowici Flat Slab
Concrete tile, Eagle standard weight 970 lb ASTM C1492 2 1/2:12 (IRC R905.3.2) Eagle Roofing technical specifications
Concrete tile, Eaglelite 720 lb ASTM C1492 2 1/2:12 (IRC R905.3.2) Eagle Roofing technical specifications

The data sheets contradict a common claim that concrete tile is always heavier than clay. Eagle’s standard concrete tile, at 970 lb per square, sits between Ludowici’s Spanish (900 lb) and French (1,025 lb) clay tiles, and Ludowici’s thick flat shingle tiles run 1,300 to 2,000 lb. Every one is still far lighter than about 4,000 lb of laid brick. Under IRC R905.3.2, clay and concrete tile need a slope of at least 2 1/2:12, with double underlayment from 2 1/2:12 up to 4:12.

Can you roof a house with actual bricks?

No. Laid brick is a walling material, not a roof covering, and four problems rule it out on a slope:

  1. Weight. A 3 5/8 in brick layer weighs about 40 psf per BIA Technical Note 28, roughly 4 times Ludowici’s French clay tile (10.25 psf) and about 18 times an architectural asphalt shingle such as CertainTeed Landmark (211 to 225 lb per square).
  2. Joints leak. Every brick needs mortar on all sides; BIA’s modular sizes assume a 3/8 in joint around each 7 5/8 in unit. On a slope, each joint is a seam water can find, unlike tiles that overlap and shed water down the face.
  3. No interlock. Roof tiles are shaped to lap and lock together; Ludowici’s French tile, for example, covers an 8 1/8 in by 13 3/8 in exposure per piece, 133 pieces per square. Flat bricks have no lap, so water sits in the joints.
  4. Support. Mortared brick needs a continuous bearing base such as a foundation or steel lintel; a roof deck or tile battens offers none.

The product you actually want for a fired clay roof is a clay tile that meets ASTM C1167, installed at 2 1/2:12 or steeper. See our clay tile roof installation guide for how the real thing goes down over battens and underlayment.

Where real bricks actually go on a roof

Bricks do appear on roofs, but at edges and penetrations, never as the field covering:

  • Parapet walls and copings. Flat and low slope roofs often end in a brick parapet. IBC Section 1503.3 requires the parapet to be coped with noncombustible, weatherproof material at least as wide as the wall is thick.
  • Chimneys. A brick chimney passes through the roof plane and is sealed to the covering with step and counter flashing. Under IRC R903.2.2, a chimney more than 30 in wide across the slope also needs a cricket on its uphill side; see our roof cricket guide.
  • Ballast on flat roofs. Loose-laid membranes are held down with ballast. The ANSI/SPRI RP-4 standard covers stone and concrete pavers, with standard pavers at a minimum of 18 psf, per IIBEC’s summary of RP-4. Loose bricks are not an RP-4 ballast type.

Brick coping still has to meet the IBC 1503.3 width rule, and a brick cap has a mortar joint at every brick, where a precast concrete, stone or metal coping section has joints only at its ends. That joint count is why specifiers often choose those copings over brick.

Do genuine brick roofs exist?

Yes, but as thin tile vaults, not as laid walling brick. The timbrel vault, also called the Catalan vault or tile vault and patented in the US by Rafael Guastavino in 1885, builds a self-supporting curved roof from thin flat tiles bedded in fast-setting mortar in two or three layers. The result is a ceramic shell working in compression that spans without formwork, closer to a masonry arch than to a shingle roof.

Roofs and ceilings built with the Spanish builder’s Guastavino Tile Arch System survive in the Boston Public Library, the Oyster Bar at Grand Central Terminal, the Registry Room at Ellis Island, and the Cathedral of St. John the Divine. Traditional brick barrel vaults and Nubian vaults use the same idea of curved fired clay carrying its own load, with the unit a thin tile in compression rather than a heavy brick laid flat.

Best roof for a brick house

Many people who search “brick roof” actually want the best roof for a brick house. On most US brick houses the brick is a veneer over a wood-framed wall (the case BIA Technical Note 28 covers), so the weight a roof can take is set by the rafters or trusses, not the brick. The table lists published weights for each common covering.

Roofing material Fit with brick Weight per square Source
Natural slate, 1/4 in Classic pairing on traditional and historic brick homes About 935 lb National Slate Association
Clay tile Matches red and buff brick; 75-year material warranty on Ludowici tile 900 to 1,025 lb (Ludowici Spanish, French) Ludowici data sheets
Concrete tile Brick-red pigments available 720 to 970 lb (Eaglelite, Eagle standard) Eagle Roofing
Standing seam metal, 24 gauge steel Clean modern contrast About 123 lb (1.23 psf) AB Martin ABSeam
Architectural asphalt shingle Lowest cost, works on any wall 211 to 225 lb (CertainTeed Landmark) CertainTeed data sheet
If your brick house has Consider Check first
An existing asphalt roof and you want slate or tile Slate or clay tile only after an engineer’s framing check The new covering adds roughly 700 to 800 lb per square over a 211 to 225 lb shingle
A roof slope under 2 1/2:12 Asphalt shingle (2:12 minimum) or standing seam Tile is not allowed below 2 1/2:12 (IRC R905.3.2)
A slope from 2 1/2:12 to 4:12 and a tile preference Concrete tile or a low-slope clay profile Double underlayment required; Ludowici’s Spanish tile lists a 4:12 maker minimum
A chimney wider than 30 in across the slope Any covering, with a cricket IRC R903.2.2
A historic district listing The covering the district’s guidelines name Local preservation commission approval before ordering

Slate and clay tile weigh four to five times an asphalt shingle (900 to 1,025 lb per square against 211 to 225 lb), so a roof framed for shingles may need an engineer’s review before a switch, especially on an older home. For the wider picture of what covers homes across the country, see our report on what US roofs are actually made of.

Frequently asked questions

Is a brick roof a real thing?

Not as a field roof covering. Brick veneer is designed around 40 pounds per square foot, its mortar joints leak on a slope, and the IRC has no section for brick roof coverings. Genuine fired clay roofs use clay roof tiles made to ASTM C1167, or in historic buildings thin tile vaults such as the Guastavino system patented in the US in 1885.

What is the difference between a brick and a clay roof tile?

Both are fired clay, but a US modular brick is a solid 3 5/8 by 2 1/4 by 7 5/8 inch walling unit laid in mortar. A clay roof tile is thin, shaped and interlocking, made to ASTM C1167 to lap over its neighbors and shed water; Ludowici’s Spanish barrel tile runs 171 pieces and 900 pounds per square.

Can you put bricks on a roof?

You should not lay bricks as a roof covering. Bricks do form parapets, which IBC Section 1503.3 requires to be coped with noncombustible, weatherproof material, and chimneys, which need a cricket when wider than 30 inches (IRC R903.2.2). In each case the waterproofing comes from the membrane, coping or flashing, not the bricks.

What are brick colored roof tiles called?

Brick red roof tiles are usually terracotta or natural clay tiles, named for the reddish brown color of fired clay. The shade comes from iron in the clay body, not from paint, so it runs through the tile. Concrete tiles made to ASTM C1492 can be pigmented to a similar brick red.

Why do people put bricks on a flat roof?

Usually as improvised ballast or to weigh down a loose membrane edge. Rated ballast for loose-laid single-ply roofs is defined by the ANSI/SPRI RP-4 standard, which covers stone and concrete pavers (standard pavers at 18 pounds per square foot minimum), not loose bricks. Bricks on a membrane are worth having a roofer check.

What is the best roof for a brick house?

Slate (about 935 pounds per square at 1/4 inch) and clay tile (900 to 1,025 pounds for Ludowici’s Spanish and French tiles) are the classic pairings for traditional brick homes. Standing seam metal at about 123 pounds per square gives a lighter, modern contrast, and architectural asphalt shingles at 211 to 225 pounds per square are the lowest cost option. Have the framing checked before switching from shingles to slate or tile.