Subscribe

REPAIR · August 8, 2026

Labor Cost to Install Roof Shingles (2026): Per Square and Hour

Labor cost to install roof shingles: $150 to $350 per square in 2026 (SquareDash, HomeGuide), plus $100 to $175 per square for tear-off. Rates by pitch.

By The Roofing Brief Team. Last reviewed: October 2026.

The labor cost to install roof shingles runs about $150 to $350 per square (100 square feet) in 2026, or roughly $1.50 to $3.50 per square foot of roof area, with tear-off billed on top. SquareDash (April 2026) puts shingle labor at $150 to $300 per square with a national average near $200, and HomeGuide (November 2025) puts it at $200 to $300 for 3-tab and $300 to $350 for architectural shingles. Labor is the largest line on the bid: 40 to 60 percent of the total per SquareDash, about 60 percent per Fixr, and 50 to 70 percent per HomeGuide.

Most roofers bill by the square rather than by the hour, but the hourly math still helps you sanity-check a bid. The U.S. Bureau of Labor Statistics Occupational Employment and Wage Statistics put the median roofer wage at $26.65 an hour ($55,440 a year) in May 2025, across 135,490 employed roofers. A crew of four to six carries that base wage plus payroll taxes, workers’ compensation, overhead, and profit, which is why the $30 to $100 per hour HomeGuide reports for billed roofing labor lands well above the raw wage.

Labor cost to install roof shingles per square, by roof type

Labor cost to install shingles rises with roof complexity, pitch, and height. A simple single-story gable roof sits at the bottom of the range near $150 per square, while a steep, multi-story roof with dormers and valleys pushes toward $350 per square. The table shows 2026 labor-only ranges by roof profile from SquareDash’s April 2026 pricing table. Squares refer to 100 square feet of roof surface, not floor area.

Roof profile Labor per square (2026) Labor for 20 squares Why it costs what it does Source
Simple gable, single story, walkable pitch (4/12 to 6/12) $150 to $175 $3,000 to $3,500 Fast, safe footing, few cuts SquareDash, April 2026
Hip roof, single story $175 to $225 $3,500 to $4,500 More hip and ridge cuts, extra flashing SquareDash, April 2026
Steep gable (8/12 or greater) $200 to $275 $4,000 to $5,500 Roof jacks and harnesses, slower pace SquareDash, April 2026
Complex roof with dormers, valleys, skylights $225 to $300 $4,500 to $6,000 Heavy detail cutting and flashing labor SquareDash, April 2026
Multi-story steep roof $250 to $350 $5,000 to $7,000 Access, staging, and full fall protection SquareDash, April 2026
Architectural (laminated) shingles, any profile $300 to $350 $6,000 to $7,000 Heavier bundles, more layout HomeGuide, November 2025
Tear-off of old shingles (add-on) +$100 to $175 (SquareDash) or +$100 to $300 (HomeGuide) +$2,000 to $3,500 Stripping, hauling, disposal, and deck cleanup SquareDash tear-off guide; HomeGuide

Tear-off is a separate line on most estimates. SquareDash prices the tear-off portion at $1.00 to $1.75 per square foot ($100 to $175 per square) including dump-trailer disposal, and HomeGuide puts old roof removal at $1 to $5 per square foot depending on the material. Under IRC R908.4, a new layer can’t go over a roof that already has 2 or more layers, so a second-layer roof forces this line onto the bid. See our full breakdown of tear-off and replacement cost for how disposal fees stack on top of labor.

Worked example: labor on a 22-square hip roof

Line Input Low High Source
Install labor 22 squares x $175 to $225 (single-story hip) $3,850 $4,950 SquareDash, April 2026
Tear-off and disposal, 1 layer 22 squares x $100 to $175 $2,200 $3,850 SquareDash tear-off guide
Steep-pitch add (only if 8/12 or steeper) 22 squares x $50 to $100 $1,100 $2,200 SquareDash, April 2026
Total labor, walkable hip Install + tear-off $6,050 $8,800 Sum of rows 1 and 2
Total labor, steep hip Install + tear-off + steep add $7,150 $11,000 Sum of rows 1 to 3

How much is labor per square foot and per hour?

Labor to install shingles costs about $2.00 to $3.50 per square foot for standard asphalt per HomeGuide (November 2025), or $1.50 to $3.00 per square foot at SquareDash’s $150 to $300 per square. Because roofers price by the square, the per-square-foot number is a conversion, not how the bid is written. HomeGuide’s own size table puts shingle labor on a 2,000 square foot roof at $4,000 to $7,000 and on a 3,000 square foot roof at $6,000 to $10,500.

By the hour, roofing labor runs roughly $30 to $100 per hour per worker, according to HomeGuide, with shingle work at the lower end of that band and metal, tile, and slate at the upper end. The BLS May 2025 median of $26.65 an hour is the wage before payroll costs and markup. Hourly billing shows up mostly on repairs and odd jobs, not full installs.

What drives the labor cost to install shingles

Six factors move the labor line more than anything else, and a bid that looks high often reflects two or three of them stacking together. Use the dollar effects below, from SquareDash’s April 2026 guide, HomeGuide and BLS, to ask a contractor which ones apply to your roof before comparing quotes.

  1. Pitch and steepness. Roofs at 8/12 or steeper add roughly $50 to $100 per square because crews need roof jacks and harnesses, and the work slows by 30 to 50 percent, per SquareDash 2026. HomeGuide flags pitches over 6:12 as the point where labor starts to climb.
  2. Number of stories and access. Two and three story roofs need taller staging and fall protection; OSHA 1926.501(b)(13) requires guardrails, nets or personal fall arrest for residential roofers 6 feet or more above a lower level.
  3. Roof complexity. Every valley, hip, dormer, chimney, skylight, and pipe boot adds cutting and flashing labor. SquareDash says a highly complex roof can take twice as long as a simple one of the same square footage, which is the gap between its $150 and $300 per square rows.
  4. Tear-off and layers. Removing old shingles, then cleaning and prepping the deck, adds $100 to $175 per square per SquareDash, or $100 to $300 per HomeGuide, and IRC R908.4 requires it once a roof has 2 layers.
  5. Region and crew wages. Labor tracks local wages. BLS May 2025 data shows roofer pay running from a 10th percentile of $37,460 a year to a 90th percentile of $81,720, so a high-wage metro bid runs above a low-wage rural one.
  6. Low slope and deck repair. On slopes from 2:12 up to 4:12, IRC R905.2.2 requires double underlayment, which adds labor; below 2:12, asphalt shingles are not allowed at all. Rotten sheathing or added ventilation is billed as extra labor once the deck is exposed.

Bid check: labor cost decision table

If your bid shows Then Threshold source
Labor under $150 per square on any shingle roof Ask what is excluded: tear-off, permit, insurance, underlayment Below SquareDash’s $150 floor
Labor of $150 to $350 per square Within published 2026 ranges; compare the profile row above SquareDash; HomeGuide
Labor over $350 per square for asphalt Ask for the pitch, story count and complexity items that justify it Above HomeGuide’s $350 architectural top
A pitch of 8/12 or steeper Expect $50 to $100 per square more than a walkable roof SquareDash, April 2026
A pitch from 2:12 to under 4:12 Confirm the bid includes double underlayment IRC R905.2.2
A pitch under 2:12 Reject a shingle bid; the area needs a low-slope membrane IRC R905.2.2
2 existing layers of shingles Tear-off must be priced in; an overlay is not allowed IRC R908.4

How labor fits into the total roof price

Labor is the single largest line on most shingle jobs. SquareDash’s breakdown for a 2,000 square foot architectural shingle roof is materials 35 to 45 percent, labor 40 to 50 percent, and overhead and profit 10 to 20 percent; Fixr puts labor at about 60 percent of the total. On Fixr’s $14,500 average shingle job, a 60 percent share is about $8,700 in labor. The labor share climbs on steep, complex, or multi-story roofs where materials are the same but the work is harder.

To see where labor sits inside a full quote, compare it against total roof replacement cost and a worked example like the cost to replace a roof on a 1,500 square foot house. Material choice also shifts the split: premium lines from the best asphalt shingles raise the material share without changing labor much, so the labor percentage drops even as the labor dollars hold steady. For a state example, see our roof replacement cost in Texas breakdown.

How to check a labor quote

Ask for labor and materials as separate lines, and ask whether tear-off is included or added; SquareDash advises asking every contractor to itemize the two. Cross-check the labor line against the $150 to $350 per square ranges above for your roof profile, then confirm the per-sheet price for replacing bad decking before work starts. For metal, tile and slate, see our roofing labor cost per square breakdown.

  1. Get the roof’s square count (total roof area divided by 100), not just the home’s floor area.
  2. Match your roof to a profile in the table and read the labor-per-square range.
  3. Multiply that range by your square count for an expected labor band, as in the 22-square worked example.
  4. Confirm tear-off, deck repair, and disposal are itemized, not buried.
  5. Treat quotes below $150 per square with caution, since they often skip permits, insurance, or tear-off.

Frequently asked questions

How much does labor cost to install shingles per square?

Labor to install shingles costs about $150 to $350 per square (100 square feet) in 2026: SquareDash puts it at $150 to $300 and HomeGuide at $200 to $350. A simple single-story gable roof sits near $150 to $175 per square, while a steep, multi-story roof runs $250 to $350. Tear-off adds about $100 to $175 per square per SquareDash.

What percentage of a roof replacement is labor?

Labor accounts for roughly 40 to 60 percent of a shingle roof replacement per SquareDash, about 60 percent per Fixr, and 50 to 70 percent per HomeGuide. On Fixr’s $14,500 average shingle job, a 60 percent share is about $8,700. The labor share rises on steep or complex roofs where the work is harder but material cost stays similar.

How much do roofers charge per hour to install shingles?

Roofing labor runs about $30 to $100 per hour per worker per HomeGuide, with shingle work at the lower end. The BLS median roofer wage was $26.65 an hour in May 2025, before payroll costs and markup. Most roofers bill by the square rather than the hour, so hourly rates mainly apply to repairs and small jobs.

Does a steep roof cost more in labor?

Yes. Roofs pitched at 8/12 or steeper add roughly $50 to $100 per square in labor because crews need roof jacks, harnesses, and extra fall protection, and the work slows by 30 to 50 percent, per SquareDash 2026. Multi-story steep roofs cost the most, up to $350 per square, since staging and access eat time before installation even begins.

Is tear-off included in the labor cost to install shingles?

Usually no. Tear-off is billed as a separate line: SquareDash prices it at $1.00 to $1.75 per square foot including disposal, and HomeGuide at $1 to $5 per square foot depending on the material. IRC R908.4 requires tear-off once a roof has 2 layers. Confirm whether a quote’s labor figure includes tear-off before comparing it to another bid.

How much is shingle labor per square foot?

Labor to install shingles costs about $2.00 to $3.50 per square foot of roof area per HomeGuide, or $1.50 to $3.00 per square foot at SquareDash’s per-square rates. Since roofers price by the square (100 square feet), the per-square-foot figure is a conversion. Multiply the per-square labor rate by your roof’s square count for the labor band.