Subscribe

MATERIALS · July 28, 2026

Galvanized vs Galvalume Roofing: Coatings, Lifespan, and Cost

Galvalume vs galvanized roofing: G90 vs AZ55 coatings, 15 to 20 vs 40 to 60 year life, same $500 to $1,300 per square cost, and coastal and barn limits.

By The Roofing Brief Team. Last reviewed: October 2026.

Galvanized vs galvalume roofing comes down to what protects the steel underneath: galvanized panels carry a zinc coating (G-90 = 0.90 oz per square foot), while galvalume panels carry an alloy of about 55% aluminum, 43.4% zinc and 1.6% silicon that the Cleveland-Cliffs GALVALUME data sheet rates at no less than twice the corrosion resistance of galvanized. Sheffield Metals puts galvalume at 40 to 50-plus years against 15 to 20 for galvanized, and Englert says galvalume outlasts galvanized by 10 to 25 years inland. Galvanized still wins in a few specific settings, pig barns first among them.

What is galvanized steel roofing?

Galvanized steel roofing is carbon steel hot-dip coated in zinc to ASTM A653, which shields the base metal from rust. The zinc corrodes sacrificially, meaning it gives itself up before the steel does. Coating weight is graded G40, G60, and G90, where the number is the minimum triple-spot zinc weight in hundredths of an ounce per square foot across both faces, per the U.S. Steel ASTM coating weight bulletin. G90, at 0.90 ounces per square foot, is the standard roofing grade. It is also the usual coating for galvanized gutters, so the roof and the gutters can share one zinc spec.

Galvanized panels have a uniform matte-gray look and a long track record on barns, sheds, and older residential roofs, and Sheffield Metals notes galvanized bends more cleanly, which is why stamped shingles and vent flashings often use it. Once the zinc around a scratch or cut edge is used up, the exposed steel rusts; Cleveland-Cliffs says galvanized’s zinc deteriorates faster at edges and across the panel after roughly the first 10 years.

What is galvalume steel roofing?

Galvalume is carbon steel coated in an aluminum-zinc alloy to ASTM A792 that combines aluminum’s barrier protection with zinc’s sacrificial action. The coating is about 55% aluminum, 43.4% zinc, and 1.6% silicon; Englert rounds it to 55%, 43.5% and 1.5%. AZ55 carries 0.55 ounces per square foot across both sides and is the usual weight for bare panels, while AZ50 (0.50 ounces) is the usual substrate under paint, per Sheffield Metals.

The aluminum forms a stable barrier while the zinc guards cut edges, which is why galvalume is often described as self-healing. The U.S. Steel GALVALUME bulletin reports that edge creep on prepainted panels is slight and stops increasing after 2 years. Bare galvalume has a reflective, spangled finish with an initial solar reflectance of 0.78 and 0.58 after 3 years, per Cleveland-Cliffs.

Galvanized vs galvalume: side-by-side comparison

The two materials cost about the same to buy and install: HomeGuide’s metal roof cost guide (November 21, 2025) prices both at $500 to $1,300 per square installed, and Cliffs says prepainted galvalume sells at a similar price per square meter to prepainted galvanized of the same gauge. Their coatings behave differently over decades. Every row below names its source.

Factor Galvanized steel Galvalume steel Source
Coating Zinc (G90 = 0.90 oz/sq ft) Aluminum-zinc alloy (55% Al, 43.4% Zn, 1.6% Si); AZ50 or AZ55 U.S. Steel bulletin; Cleveland-Cliffs
Corrosion resistance Baseline At least 2 times (Cliffs); 2 to 4 times (Sheffield) Cleveland-Cliffs; Sheffield Metals
Typical lifespan 15 to 20 years (Sheffield); 20 to 50 years (Englert) 40 to 50+ years (Sheffield); 40 to 60 projected (Cliffs); 40 to 70 (Englert) Named makers
Installed cost per square $500 to $1,300 $500 to $1,300 HomeGuide, Nov 2025
Cut-edge behavior Less red rust at edges in the first years Slight edge creep that stops after about 2 years Cliffs (under 10 years); U.S. Steel bulletin
Substrate warranty Not offered in Englert’s sample warranty 15 to 25.5 years typical (Sheffield); 25 yr AZ55, 20 yr AZ50 (Englert); 45 yr AZ55, 50 yr AZ50 (U.S. Steel) Sheffield; Englert; McElroy, May 2023
Heat discoloration Begins around 450°F None up to 600°F Cleveland-Cliffs
Best for Pig barns, potash storage, tight bends Most residential and commercial roofs, inland exposure Cleveland-Cliffs; Sheffield Metals
Weak spot Faster general corrosion, shorter life Curing concrete and mortar, pig barns, salt spray Cleveland-Cliffs

Why galvalume usually lasts longer

Galvalume outlasts galvanized steel because aluminum builds a durable oxide barrier while the zinc still protects raw edges. Cleveland-Cliffs bases its “at least twice the service life” figure on exposure tests run for 36 years in the USA and 17 years in Canada, from rural to severe marine sites, and projects at least 35 years before major maintenance. Englert puts the inland gap at 10 to 25 years of extra life.

The cut-edge story is more nuanced than most guides admit. Cliffs says galvanized may show less red rust at cut edges than galvalume in the short term, under about 10 years depending on the environment, after which the zinc deteriorates faster at edges and across the panel. On galvalume, U.S. Steel’s test-site data shows edge creep on prepainted panels is slight and stops growing after 2 years. That long-run behavior drives most of the lifespan and warranty gap between the two.

Where galvanized still wins

Galvanized steel is the safer choice for pig barns. Cleveland-Cliffs says galvalume is not recommended in pig barns, where the confinement environment is “severely corrosive” and “especially detrimental” to the coating, or in bulk fertilizer (potash) storage in humid regions. For cattle, poultry and horse buildings, Cliffs says galvalume can give equal or better life than galvanized with proper waste management, ventilation, insulation and building design, but Sheffield Metals lists buildings where animals are confined among typical galvalume warranty exclusions.

Galvanized also wins where a part needs tight bends or deep stamping, and where the panel must touch materials galvalume should not: Cleveland-Cliffs warns that bare and prepainted galvalume corrode rapidly in contact with mortar and concrete, especially while curing, and advises against lead flashings and copper-bearing pressure treated lumber. If the building houses pigs, choose galvanized regardless of the longer life galvalume offers elsewhere.

Coastal and marine exposure: often neither

Near saltwater, both steel coatings struggle, and the warranties show where. Sheffield Metals lists typical galvalume substrate warranty exclusions within 1,500 feet of a coastline with breaking surf, 800 feet of a large bay and 400 feet of a marsh. Englert’s sample U.S. roof warranty goes further: no warranty for any period on mill finish or prepainted galvalume within one-half mile of a seacoast, salt water or brackish water.

For homes inside that one-half mile line, aluminum roofing is the usual answer, and Englert does offer a 25-year paint warranty on prepainted aluminum there if annual maintenance is performed. A painted galvalume with a PVDF finish can work farther inland, but ask the panel maker to confirm coverage for your address in writing. See our guide on aluminum roofing versus steel for the coastal tradeoff.

Zincalume vs galvanised: the same comparison outside the U.S.

ZINCALUME is BlueScope’s brand name for the same 55% aluminum-zinc coating, sold in Australia and Asia, so “zincalume vs galvanised” is the galvalume vs galvanized question in other markets. BlueScope’s technical bulletin CTB-06 says it has made the AZ coating since 1976 at about 55% aluminium, 1.5% silicon and the balance zinc, and that its next-generation AM coating adds about 2% magnesium.

Does the coating matter on painted panels?

On a painted panel, the metallic coating still matters, but less than buyers assume for the exposed field of the roof. The paint system, usually PVDF or SMP, is the first barrier against weather across the flat of the panel, and the substrate warranty and paint warranty are separate documents: Englert pairs a 25-year galvalume warranty with a 35-year warranty on its PermaColor 3500 paint beyond one-half mile from salt water. The metallic layer earns its keep at cut edges, fastener holes, and scratches where the paint is broken.

That is where galvalume’s long-run edge behavior pulls ahead. If you are buying bare, unpainted panels, the choice is more consequential because the metallic coating is the only defense; bare galvalume is normally AZ55 (0.55 oz per square foot) with a clear acrylic film, which Sheffield notes can scuff during handling. For painted panels, weigh the paint warranty and the substrate warranty together. Our overview of what metal roofs are made of breaks down how coatings and finishes stack up.

Which should you choose?

For most residential and commercial roofs more than one-half mile from salt water, galvalume is the stronger value: the same $500 to $1,300 per square installed on HomeGuide, at least twice the corrosion resistance on Cliffs’ data, and a substrate warranty of 20 to 50 years depending on maker and coating weight. Galvanized earns its place in specific conditions.

If the building… Choose Why (source)
Houses pigs, or stores potash in a humid region Galvanized G90 Cliffs: galvalume not recommended
Houses cattle, poultry or horses Galvalume only with ventilation and waste management, or galvanized Cliffs allows it; Sheffield lists animal confinement as a warranty exclusion
Sits within one-half mile of salt or brackish water Aluminum Englert: no galvalume warranty inside one-half mile
Sits 1,500 feet or less from breaking surf Aluminum, or written maker approval Sheffield: typical galvalume exclusion distance
Is a long-term home or commercial roof inland Galvalume, AZ50 painted or AZ55 bare Cliffs: 40 to 60 year projected life
Touches concrete, mortar or treated lumber Galvanized, or isolate the galvalume Cliffs: rapid galvalume corrosion against curing concrete
Is a low-budget, short-horizon shed Either; pick on local price HomeGuide: same $500 to $1,300 per square installed
  1. Does the building house animals? If it houses pigs, choose galvanized. For other livestock, galvalume needs ventilation and waste management under Cleveland-Cliffs guidance, and many substrate warranties exclude animal confinement.
  2. Is the site within one-half mile of saltwater? If yes, look past both and price aluminum; Englert offers no galvalume warranty inside that line.
  3. Is it a long-term roof on a home or commercial building inland? Choose galvalume for the 40 to 60 year projected life and the substrate warranty.
  4. Are you buying bare, unpainted panels? Favor AZ55 galvalume, since the metallic coating is the only corrosion defense; Englert warrants AZ55 mill finish for 25 years against 20 for AZ50.
  5. Is it a low-budget, short-horizon structure? Galvanized can be the economical choice where a 15 to 20 year life, Sheffield’s figure, is acceptable.

Whichever coating you pick, gauge and panel profile still shape durability and cost. Compare our notes on thicker 22-gauge steel and on corrugated metal panels, and factor current material pricing from our 2026 metal roofing tariff and import report. For the full galvalume spec sheet, see our galvalume metal roofing guide.

Frequently asked questions

Is galvalume better than galvanized?

For most roofs, yes. Cleveland-Cliffs rates galvalume at no less than twice the corrosion resistance of galvanized, Sheffield Metals puts its life at 40 to 50-plus years against 15 to 20, and HomeGuide prices both at $500 to $1,300 per square installed. The main exception is pig barns, where Cliffs says galvalume should not be used.

How long does a galvalume roof last?

Cleveland-Cliffs projects 40 to 60 years in rural and industrial environments, with at least 35 years before major maintenance, and Englert gives 40 to 70 years. Lifespan drops near saltwater, against curing concrete or in pig barns, and Englert offers no galvalume warranty within one-half mile of salt water.

Does galvalume rust?

Galvalume can show slight red rust at cut edges, and U.S. Steel reports that edge creep on prepainted galvalume stops increasing after 2 years. Cleveland-Cliffs notes galvanized may show less edge rust in the first years, under about 10, before its zinc deteriorates faster than galvalume’s coating.

Why is galvalume not used on barns?

Animal waste releases ammonia and other corrosive gases, and Cleveland-Cliffs calls the pig barn environment severely corrosive and especially detrimental to galvalume. Cliffs allows galvalume in cattle, poultry and horse buildings with proper ventilation and waste management, but Sheffield Metals lists animal confinement as a typical warranty exclusion.

Is galvalume good for coastal homes?

Not close to the water. Sheffield Metals lists typical galvalume warranty exclusions within 1,500 feet of breaking surf, 800 feet of a large bay and 400 feet of a marsh, and Englert offers no galvalume warranty within one-half mile of salt or brackish water. Aluminum is the usual choice inside those distances.

Do galvanized and galvalume cost the same?

Roughly, yes. HomeGuide’s November 2025 guide prices both at $500 to $1,300 per square installed, and Cleveland-Cliffs says prepainted galvalume sells at a similar price per square meter to prepainted galvanized of the same gauge. The larger difference over time is lifespan and warranty.

Is zincalume the same as galvalume?

Yes, in coating chemistry. ZINCALUME is BlueScope’s brand for a coating of about 55% aluminium, 1.5% silicon and the balance zinc, made since 1976, and its newer AM version adds about 2% magnesium, per BlueScope bulletin CTB-06.