Subscribe

OPERATIONS · July 31, 2026

Best Gutter Machine (2026): Top Picks Ranked and Compared

Gutter machine picks for 2026: NTM MACH II from $9,800, plus KWM IronMan, Englert, Eastside and Grover compared on speed, drive, half-round and price.

By The Roofing Brief Team. Last reviewed: October 2026.

The best gutter machine for most seamless gutter contractors in 2026 is the New Tech Machinery MACH II 5″/6″ Combo, a portable roll-former (also called a gutter making machine, or an eavestrough machine in Canada) that runs both common residential K-style sizes at up to about 50 feet per minute on a polyurethane drive, from $12,300 on NTM’s gutter machine page. It is not the cheapest machine on this list, and it is not the right pick for every shop. Contractors who run half-round or fascia profiles are better served by KWM Gutterman (6″ Reverse Curl Half Round listed at $33,841) or Eastside Machine (fascia machines rated to 36 ft/min), and Grover’s HR6 is the lower-speed half-round option at 30 ft/min.

How we picked (and what we did not test)

These rankings come from the five makers’ published spec sheets and price pages (NTM, KWM Gutterman, Englert, Eastside Machine and Grover Machine), checked in October 2026, not from a hands-on lab test. We did not run coil through each machine side by side. A portable gutter machine costs $9,800 to $33,841 at the list prices published here, so the comparison rests on documented forming speed, drive system, supported profiles and maximum gauges. Treat every “best for” call as a shortlist for your own demo on your regional profile and coil.

Best gutter machines for 2026 at a glance

All five brands below form seamless gutter on site from aluminum, steel, or copper coil. The table compares each brand’s mainstream residential configuration. Speeds are manufacturer-stated maximums, from 30 to about 50 feet per minute, and drop with operator handling and coil changes.

Machine Main profiles Max speed Drive / rollers Max material (maker) Approx. 2026 price Best for Source
NTM MACH II 5″/6″ Combo 5″ and 6″ K-style ~50 ft/min Polyurethane drive Not listed on NTM page From $12,300 Overall versatility NTM
KWM Gutterman IronMan 5″ 5″ K-style (6″, 7″, 8″, fascia and half-round models also sold) ~35 ft/min Polyurethane drive, 3/4 HP motor 24 ga steel, .032 aluminum, 16 to 20 oz copper Quote (5″ Fascia IronMan listed at $19,217) Widest profile range, US-built KWM
Englert MetalMan 650 5″/6″ K-style combo (555, 660, 770 box also sold) ~45 ft/min Polyurethane drive, 1 HP motor 24 ga steel, 20 oz copper Quote only High volume and specialty profiles Englert
Eastside EM Fascia (4.5″, 5.5″, 7.5″) Fascia gutter Variable to 36 ft/min 12 driven QPQ steel forming rollers, 1.5 HP 26 to 29 ga steel, .032 aluminum, 16 to 20 oz copper Quote only Fascia-style gutters Eastside
Grover HR6 (plus Pro5-K, Pro6-K) 6″ half-round; 5″/6″ K-style 30 FPM (HR6) Chrome-plated steel, spring-loaded stations, 3 HP (HR6) Aluminum, steel, copper; 11.75″ coil (HR6) Quote only Value and half-round Grover

New Tech Machinery publishes K-style prices, and KWM Gutterman lists prices on some models (fascia and half-round). Englert, Eastside, and Grover sell through quotes and dealers, so request a written quote that itemizes the shear, reel stand and coil cradles before you compare.

How much does a gutter machine cost?

A new portable K-style gutter machine costs $9,800 to $12,300 at New Tech Machinery’s published 2026 prices, before a trailer and coil, while fascia and half-round machines list for $19,217 to $33,841 at KWM Gutterman. Profile is the biggest price driver: KWM’s 6″ half-round machine lists at about 3.2 times NTM’s 6″ K-style price, and NTM’s BG7 7″ box gutter machine starts at $71,600.

Machine Profile Listed price (Oct 2026) Source
NTM MACH II 5″ 5″ K-style From $9,800 NTM gutter machine page
NTM MACH II 6″ 6″ K-style From $10,500 NTM gutter machine page
NTM MACH II 5″/6″ Combo 5″ and 6″ K-style From $12,300 NTM gutter machine page
KWM 5″ Fascia IronMan 5″ fascia $19,217 KWM product page
KWM 6″ Reverse Curl Half Round 6″ half-round $33,841 KWM product page
NTM BG7 7″ box gutter From $71,600 NTM gutter machine page
Englert, Eastside, Grover machines All Quote only Maker sites

NTM states its prices depend on machine configuration, so options such as a shear or length controller raise the total. To check whether a machine pays back in your market, compare it against installed seamless gutter prices: HomeGuide puts aluminum K-style at $6 to $12 per linear foot installed and HomeWyse at $6.29 to $10.45 (May 2026), as compiled in our guide to seamless gutter cost per foot.

What’s the best gutter machine for half-round systems?

For half-round gutters, the two dedicated machines with published specs are KWM Gutterman’s 6″ Reverse Curl Half Round (about 35 ft/min, $33,841 list) and Grover Machine’s HR6 (30 FPM, 3 HP, quote only). KWM’s machine is rated for .032 aluminum and 16 to 20 oz 3/4-hard copper and weighs about 1,753 lb; Grover’s HR6 runs aluminum, steel and copper from 11.75-inch coil with a 1,000 lb shipping weight. NTM’s MACH II and Englert’s MetalMan K-style machines do not form half-round.

Spec KWM 6″ Reverse Curl Half Round Grover HR6 Source
Speed ~35 ft/min 30 FPM Maker spec pages
Motor 1 1/2 HP, 110 V single phase 3 HP Maker spec pages
Materials .032 aluminum, 16 to 20 oz copper Aluminum, steel, copper Maker spec pages
Max coil width 11.875 in 11.75 in Maker spec pages
Weight ~1,753 lb 1,000 lb shipping Maker spec pages
Price $33,841 list Quote KWM; Grover

Pick KWM ($33,841 list) if you want a published price and a polyurethane-drive K-style machine from the same maker; pick Grover if you also form steel half-round or want spring-loaded stations that, per Grover, do not need to stay loaded between jobs. Our guide to half-round gutter installation covers the hangers, spacing and costs that set that profile apart from K-style.

1. New Tech Machinery MACH II 5″/6″ Combo: best overall

The MACH II 5″/6″ Combo is the best all-around gutter machine for a contractor who wants one unit to cover the two sizes that dominate residential work. It forms both 5-inch and 6-inch K-style from a single machine at about 50 feet per minute, the fastest stated speed among the brands here, and NTM says it pioneered the polyurethane drive rollers that are now standard across the gutter machine industry, with the first MACH II shipped in 1994.

New Tech Machinery publishes its 2026 prices: the 5-inch MACH II from $9,800, the 6-inch from $10,500 and the 5″/6″ combo from $12,300, with the final price depending on configuration, so a shear and other options raise it. Select MACH II models can be bought online directly from NTM, while combo and custom configurations go through its sales team. That pricing transparency is a real part of the value case.

Best for: contractors who want maximum versatility and speed from one portable machine and value published pricing.

2. KWM Gutterman IronMan: best heavy-duty build

KWM Gutterman’s IronMan line is the pick for shops that prioritize a rugged, US-built frame and the widest profile range from one manufacturer. KWM builds its machines in Rockdale, Illinois, has been in business since 1983, and offers the IronMan in 5-inch, 6-inch, 7-inch and 8-inch K-style plus fascia and half-round configurations, along with lighter IronMan Junior versions.

The 5-inch IronMan forms K-style at about 35 feet per minute on a polyurethane drive with a 3/4 HP, 110-volt motor, weighs about 1,100 lb (the 6-inch about 1,300 lb), and handles 24-gauge steel, .032-inch aluminum and 16 to 20 oz copper. KWM lists prices on some models, such as $19,217 for the 5″ Fascia IronMan, but quotes its K-style IronMan machines. The tradeoff versus the MACH II is a lower stated speed (35 vs 50 ft/min).

Best for: established shops that want a heavy-duty machine and access to half-round or fascia profiles from the same brand.

3. Englert MetalMan: best for high volume and specialty profiles

Englert’s MetalMan machines suit high-volume operations and firms that need profiles beyond standard K-style. Englert started in 1966, when Herb Englert opened his own gutter business, per Englert’s company history, and it joined Great Day Improvements, alongside the LeafGuard brand, in June 2024. Its lineup includes the MetalMan 555 (5-inch), 660 (6-inch), 650 (5″/6″ combo) and 770 (7-inch box), plus its proprietary RainPro high-capacity profile and the one-piece LeafGuard hooded gutter.

The MetalMan 650 combo runs at about 45 feet per minute on dedicated powered polyurethane drive rollers with a 1 HP motor and weighs about 1,000 lb, per Englert’s spec page. Englert’s MetalMan 555 spec page rates the 5-inch machine for 24-gauge steel and 20 oz 3/4-hard copper, which suits crews that fabricate copper or box gutter. Pricing is by quote. RainPro and LeafGuard are proprietary, so those profiles tie you to Englert’s ecosystem.

Best for: higher-volume contractors and firms that need copper, box, or the proprietary RainPro and LeafGuard profiles.

4. Eastside Machine Eagle and EM Fascia: best for fascia gutters

Eastside Machine Company is the specialist pick where fascia-style gutters are the regional standard. Building roll-formers in Fargo, North Dakota since 1960, Eastside makes the Eagle K-style machine plus the EM 4.5-inch, 5.5-inch, and 7.5-inch fascia gutter machines, which form the flat-faced profile that Eastside notes is commonly used with 2-by-4-inch trusses.

The EM 5.5-inch fascia machine runs at a variable speed up to 36 feet per minute on 12 driven, nitrocarburized (QPQ) steel forming rollers with a 1.5 HP, 110-volt motor, and is rated for 26 to 29 gauge steel, .032-inch aluminum, and 16 to 20 oz copper. It weighs 2,170 lb with two turntables and coil spool mounts. Pricing is by quote. If most of your market wants K-style, Eastside is not the first stop, but for fascia work its dedicated machines are purpose-built.

Best for: contractors in regions where fascia-style gutters dominate and a purpose-built fascia machine matters.

5. Grover Machine: best value and half-round

Grover Machine is the value-oriented and half-round choice. Grover has built roll-forming equipment since 1958 in St. Louis, Missouri and says it has sold several thousand machines in more than 30 countries. It offers the Pro5-K and Pro6-K K-style machines and the HR6 and HR8 half-round machines for 6-inch and 8-inch half-round.

Grover’s HR6 runs at 30 feet per minute with a 3 HP drive on hard chrome-plated steel rollers, and every station is spring loaded, which Grover says creates a constant load on the material and removes the need to keep the machine loaded from job to job. Speed is the lowest on this list, so Grover fits crews that value a lower entry point or specifically need half-round over raw production speed. Pricing is by quote through Grover and its dealers.

Best for: budget-conscious buyers and half-round specialists who do not need the fastest forming speed.

Polyurethane vs steel drive rollers

The drive system is the spec that most affects handling and finish. Polyurethane drives, used by New Tech Machinery, KWM Gutterman and Englert’s MetalMan, grip coil with softer rollers, and NTM says it introduced them to the industry. Driven steel forming rollers, used by Eastside (QPQ nitrocarburized) and Grover (chrome-plated, spring-loaded), are hard-wearing; Eastside says nitrocarburizing improves wear resistance. Steel rollers that are not kept clean can mark painted finishes, which NTM’s troubleshooting guide lists as black streaks and scuffs.

Neither is universally “better.” Polyurethane-drive machines in this roundup run 35 to 50 ft/min on aluminum and up to 24-gauge steel, while the steel-roller machines run 30 to 36 ft/min and add steel half-round (Grover) and fascia (Eastside). Ask any dealer to run your exact coil and gauge before deciding.

Which gutter machine fits your work?

If your work is Choose Why (maker spec)
Residential 5″ and 6″ K-style, mostly painted aluminum NTM MACH II 5″/6″ Combo ~50 ft/min, polyurethane drive, from $12,300
Residential 5″ K-style only, tight budget NTM MACH II 5″ From $9,800, lowest published price here
K-style plus copper or 7″ box on commercial jobs Englert MetalMan 650 or 770 ~45 ft/min, 20 oz copper, 24 ga steel
Fascia gutter is the regional standard Eastside EM Fascia or KWM 5″ Fascia IronMan Dedicated fascia profiles; KWM lists $19,217
Half-round in aluminum or copper KWM 6″ Reverse Curl Half Round ~35 ft/min, 16 to 20 oz copper, $33,841 list
Half-round including steel, lower speed acceptable Grover HR6 30 FPM, 3 HP, aluminum, steel and copper
Commercial 7″ box gutter at volume NTM BG7 From $71,600

Which gutter machines are easiest to operate and maintain?

No independent test ranks gutter machines on ease of use, so judge it on three documented points: whether the forming stations adapt to coil thickness, whether operator training is included, and how often the shear needs grease (every 30 to 50 cuts on NTM machines). Maintenance is similar across brands: clean rollers, lubricated moving parts, an aligned coil reel, and dry storage. Skipping it shows up as streaks, crooked runs, and bad cuts.

On operation, the documented differences are these. New Tech Machinery offers personalized training on your machine and profiles, free to new machine owners, at your location or its Aurora facility (NTM gutter machines). Grover’s spring-loaded forming stations keep a constant load on the material, which cuts setup when you switch gauges. Englert says materials run through its 650 combo with “little or no” adjustment, and its MetalMan forming rollers are free floating rather than driven.

On maintenance, New Tech Machinery’s troubleshooting guide lists the routine that applies to any portable roll-former:

  • Wipe and inspect the rollers. Buildup on drive and forming rollers causes black streaks and scuff marks on the coil.
  • Lubricate chains, sprockets, shafts, and the shear. NTM calls for greasing its shear every 30 to 50 cuts with Super Lube multi-purpose synthetic grease.
  • Keep the coil reel square behind the machine. A misaligned reel produces twisted or curved runs.
  • Match the shear to the profile. Diagonal cuts or jams point to a mismatched blade or an off-center die; New Tech Machinery says to align the shear after changes.
  • Store it dry and covered. If the machine must sit outside, cover it so moisture cannot build up.

Portable vs shop (stationary) machines

Portable roll-formers, which every machine in this roundup is, let a crew form seamless gutter at the job site and cut it to the exact run, with machine weights from about 1,000 lb (Englert 650) to 2,170 lb (Eastside fascia with turntables) that set the trailer you need. Stationary shop machines can offer higher throughput for a fabrication yard but require you to transport finished lengths, which limits run length to what your truck or trailer carries. Our comparison of seamless and sectional gutters sets out the cost difference and when sectional still wins.

For residential and light commercial gutter contractors, a portable machine of about 1,000 to 2,170 lb is the standard choice because on-site forming is the core of a seamless gutter business. To understand how that system fits the wider install, see our overview of how seamless gutter systems work.

How to choose the right gutter machine

Match the machine to the work you actually sell, not to the highest spec sheet. A shop that forms 5″ aluminum K-style all season gains nothing from a $33,841 half-round machine, and a fascia market makes a $9,800 K-style machine the wrong buy.

  1. Confirm your regional profile. Check whether your market runs K-style, fascia (common with 2-by-4-inch trusses, per Eastside), or half-round before you shortlist. Fascia and half-round narrow the field to KWM, Eastside and Grover.
  2. Decide 5-inch, 6-inch, or combo. NTM’s combo costs $1,800 more than its 6-inch machine and $2,500 more than its 5-inch. Our guide to 5-inch vs 6-inch gutters explains which sizes your jobs will call for.
  3. Pick a drive type for your coil. Choose polyurethane for high-mix painted aluminum; choose driven steel rollers if you form steel half-round or fascia.
  4. Weigh speed against handling. Stated speeds run from 30 FPM (Grover HR6) to about 50 ft/min (MACH II); speed helps on long straight runs but matters less than clean forming on a mixed day.
  5. Budget the full system. Add a shear, reel stand, and coil cradles to the base machine price, then factor coil, a trailer rated for a 1,000 to 2,170 lb machine, and training. See seamless gutter cost per foot to model your material economics, and our guide to gutter coil sizes and prices for the coil itself. Crews hanging long gutter runs also need stable ladders; our best ladders for roofing work covers the options.
  6. Demo before you buy. Run your own coil and gauge (up to 24-gauge steel on most K-style machines here) on the actual machine, and compare against a related on-site roll-former such as a metal roofing machine if you plan to expand into panel work.

Where to buy a gutter machine, new or used

Professional gutter machines for contractors are bought from the manufacturer or its dealers. New Tech Machinery sells select MACH II models online and handles combo and custom machines through its sales team. KWM lists some machines with prices on its site, and Englert, Eastside, and Grover sell by quote through the factory and dealers; Eastside also lists used machines on its site. Used machines otherwise come from dealers and other contractors.

Route Where What you get Watch for
New, direct Manufacturer website or sales team Current model, factory warranty, owner training where offered Accessories priced separately
New, dealer Authorized dealer for the brand Local demo, quote, and service contact Quote-only pricing; compare dealers
Used Dealers and contractors selling equipment Lower entry cost on a durable tool Worn rollers, missing parts, no factory support

Buying new brings support. New Tech Machinery, for example, offers a 3-year limited warranty on manufacturing defects and workmanship, a lifetime warranty on drive rollers, and lease-to-own, loan, and seasonal payment plans through finance partners (NTM gutter machines). Confirm terms for any brand in writing before you order.

What to look for in a used gutter machine:

  • Roller condition. Check drive and forming rollers for buildup, scoring, or damage that will mark coil.
  • A test run on your coil. Form a length of your own coil and gauge, and check the profile and finish.
  • Clean, square cuts. Diagonal cuts or jams at the shear point to blade or die problems.
  • Straight output. Twisted or curved runs can mean reel misalignment or worn parts.
  • Storage history. A machine kept dry and covered is a safer bet than one left out in the weather.
  • Manufacturer support. Give the serial number to the manufacturer and ask what parts, service, and warranty, if any, carry over to a second owner.

Frequently asked questions

How much does a seamless gutter machine cost in 2026?

New Tech Machinery lists its MACH II 5-inch K-style machine from $9,800, the 6-inch from $10,500, and the 5″/6″ combo from $12,300, depending on configuration. Specialty machines cost more: KWM lists its 5″ Fascia IronMan at $19,217 and its 6″ half-round machine at $33,841. A shear, reel stands, coil cradles and a trailer add to the total.

What is the best seamless gutter machine brand?

There is no single best brand for every shop. New Tech Machinery leads on speed (about 50 ft/min) and published pricing, which makes its MACH II combo the strongest all-around pick. KWM Gutterman offers the widest profile range, Englert suits high volume and specialty profiles, Eastside specializes in fascia gutters, and Grover in value and half-round.

What’s the best gutter machine for half-round systems?

KWM Gutterman’s 6″ Reverse Curl Half Round machine (about 35 ft/min, .032 aluminum and 16 to 20 oz copper, $33,841 list) and Grover’s HR6 (30 FPM, 3 HP, aluminum, steel and copper, quote only) are the dedicated half-round options. NTM and Englert K-style machines do not form half-round.

Are polyurethane or steel drive rollers better?

It depends on your material. Polyurethane drives, used by NTM, KWM and Englert, grip coil with softer rollers and suit high-mix painted aluminum. Driven steel rollers, used by Eastside (up to 36 ft/min) and Grover (30 FPM), are hard-wearing and run steel fascia and half-round, but they must be kept clean to avoid marking painted finishes. Test your exact coil before deciding.

How fast can a gutter machine run?

Manufacturer-stated top speeds range from 30 to about 50 feet per minute among leading portable machines. New Tech Machinery’s MACH II is rated at about 50 ft/min, Englert MetalMan about 45, Eastside fascia up to 36, KWM IronMan about 35, and Grover HR6 30. Real-world output is lower because coil changes and cut-to-length steps reduce the effective rate.

Can one machine make both 5-inch and 6-inch gutters?

Yes. Combo machines such as the New Tech Machinery MACH II 5″/6″ and Englert MetalMan 650 form both common residential K-style sizes from one unit. NTM’s combo lists $1,800 above its 6-inch machine, which avoids buying and transporting two machines if your work regularly calls for both sizes.

Is it worth buying a used gutter machine?

A used machine can cut entry cost, and roll-formers are durable, but inspect drive rollers, forming stations, and profile accuracy before you buy, and run your own coil. Compare the asking price with new list prices ($9,800 to $12,300 for an NTM K-style machine) and ask the manufacturer what support transfers to a second owner.