A concrete roof costs about $7 to $19 per square foot installed to replace, or roughly $10,500 to $47,500 for a 1,500 to 2,500 square foot roof, with a national average near $24,500. The number most homeowners never hear: concrete tiles routinely outlast the underlayment beneath them by decades, so a full tear-off is often the wrong job. Stripping the tiles, replacing the failed underlayment, and resetting the same tiles, a job roofers call a relay, costs less: Eagle Roofing Products, which sells new tile, says a lift and re-lay is about 20 percent less in cost than a complete tile replacement, and Fixr prices it at $3 to $5 per square foot.
How much does concrete roof replacement cost in 2026?
Concrete roof replacement costs $7 to $19 per square foot installed. For a typical 1,700 square foot home, expect $20,400 to $31,450 at $12 to $18.50 per square foot. A relay that reuses your existing tiles costs far less, because you skip new tile material and pay mainly for underlayment and labor.
The biggest cost fork is new tiles versus reusing the ones on your roof: repair averages about $1,200, a relay runs $3 to $5 per square foot, and full replacement runs $7 to $19. For comparison, Fixr lists concrete tile at $14,000 to $24,000 for a home with about 2,000 square feet of roofing, and Homewyse put tile roof installs (concrete and clay combined) at $19.01 to $26.03 per square foot in May 2026, so expect quotes above the low end of our range in high-cost metros.
| Scope of work | What it covers | Typical 2026 cost |
|---|---|---|
| Tile repair | Replace a handful of cracked or slipped tiles, reseal flashing | About $1,200 on average |
| Relay (remove and reset) | Strip tiles, install new underlayment, reset the existing tiles | $3 to $5 per sq ft, about $6,000 to $10,000 for 2,000 sq ft, of which labor is $2.75 to $3.50 per sq ft (Fixr, Jan. 31, 2025); $4 to $6 per sq ft in Arizona (America Roofing) |
| Full replacement | Tear off old roof, install all new concrete tile and underlayment | $7 to $19 per sq ft; $10,500 to $47,500 total |
Full replacement pricing scales with roof size. These ranges assume a straightforward pitch and no structural work.
| Roof size | Full concrete tile replacement |
|---|---|
| 1,500 sq ft | $10,500 to $28,500 |
| 1,700 sq ft | $20,400 to $31,450 |
| 2,500 sq ft | $17,500 to $47,500 |
For a wider view of how tile stacks up against asphalt, metal, and slate on price and lifespan, see The Roofing Brief 2026 Roofing Cost Report.
What does “concrete roof” actually mean: tile or slab?
In US homes, “concrete roof” almost always means a concrete tile roof: individual molded tiles laid over battens and underlayment. A structural concrete roof, a poured or precast slab, is a different and far rarer residential job, priced by engineering and cubic yardage rather than by tile. If a slab roof is leaking rather than failing, see our guide to concrete flat roof leak repair for crack sealing and liquid membranes. A tile roof still adds roughly 900 to 970 lb per square at Eagle’s standard weight. The pricing here covers concrete tile, which is the intent behind nearly every concrete roof replacement search.
The distinction matters because the two jobs share almost no cost logic. A tile roof is a system of reusable parts over a waterproofing layer. A concrete slab is the structure itself, and replacing one is a framing and engineering project, not a reroof. If you are still mapping out how roof systems, layers, and materials fit together, start with The Roofing Brief guide to roofing basics.
Relay or full replacement: which does your roof need?
Most concrete tile roofs fail from the underlayment up, not the tile down. Concrete tiles last 50 years or more, while the underlayment beneath them typically needs replacing at about 20 to 30 years, according to Fixr and Devore Capital Roofing. If your tiles are largely intact, a relay that removes, re-underlays, and resets the tiles is usually the right call, and it reuses most of the tiles you already own. For the line-by-line math, see our guide to the cost to replace underlayment on a tile roof.
That reuse is where the savings live. Because you skip buying new tile, Eagle Roofing Products puts a lift and re-lay at about 20 percent less than a complete tile replacement, noting that the labor for the two jobs is virtually identical. Third-party unit prices imply a wider gap on many roofs, so get both priced. Work through this sequence before you approve any bid.
- Inspect the tiles. Widespread cracking, spalling, or crumbling edges points toward replacement. Isolated damage does not.
- Date the underlayment. If it is past 20 to 30 years or leaking, it needs replacing whether or not the tiles do.
- Budget for breakage. Fixr’s pricing assumes about 10 percent of tiles break during removal, and Devore Capital Roofing puts typical breakage at 5 to 15 percent, so a relay still includes some new matching tile.
- Confirm tile availability. A discontinued profile or color that cannot be matched can push a relay toward full replacement.
- Check the structure. If the deck or framing is compromised, the roof comes off regardless.
Ask every contractor to quote the relay and the full replacement as separate line items. On the national average of about $24,500, Eagle’s 20 percent lift-and-re-lay saving works out to roughly $4,900. Many bids default to full replacement because it is simpler to sell, not because your tiles are done.
Decision table: relay, repair or replace
| If your roof shows | Then price | Cost to quote |
|---|---|---|
| A few cracked or slipped tiles, underlayment under 20 years old | Tile repair | About $1,200 on average |
| Mostly intact tiles, underlayment past 20 to 30 years or leaking | Relay (strip, re-underlay, reset) | $3 to $5 per sq ft, about 20 percent under full replacement per Eagle |
| Widespread cracking or spalling across slopes, or tiles you cannot match | Full replacement | $7 to $19 per sq ft |
| Sagging deck or framing not rated for 900 to 970 lb per square | Engineer’s assessment before any tile work | Reinforcement priced separately in writing |
What drives concrete roof replacement cost?
Five factors move the price beyond roof size: tile profile ($4 to $10 per square foot flat, $8 to $10 curved), structural reinforcement, tear-off and disposal (about $1,000), underlayment spec, and permits ($150 to $500). Profile, structure and underlayment account for most of the swing between a low and high quote on the same house.
- Tile profile. Flat concrete tile runs $4 to $10 per square foot, while curved Spanish or S profiles run $8 to $10 per square foot. Tile material alone is $3 to $5 per square foot.
- Structural reinforcement. Concrete tile weighs about 900 to 970 pounds per square for Eagle’s standard-weight concrete tile, or 550 to 720 for its lightweight Eaglelite line, per Eagle’s technical specifications. If your framing was not designed for that load, reinforcement can add thousands of dollars, so get an engineer’s assessment and a written price before you commit.
- Tear-off and disposal. Removing and hauling the old roof averages about $1,000, more on steep or multi-layer roofs.
- Underlayment spec. Standard felt is cheapest, but high-temperature synthetic underlayment costs more and lasts longer than the 20 to 30 years felt typically gives, and it is the layer a relay is really buying.
- Permits and complexity. Permits add $150 to $500, and valleys, hips, skylights, and steep pitch all raise labor.
Signs a concrete tile roof needs replacing, not repairing
A concrete tile roof needs replacement or a relay when the failure is systemwide rather than a few tiles, or when the underlayment is past its 20 to 30 year life. Scattered cracked tiles are a repair, at about $1,200 on average. Widespread damage, an aged underlayment, or active interior leaks signal that the waterproofing layer has reached the end of its service life.
- Many cracked, spalling, or slipping tiles across multiple slopes
- Underlayment older than 20 years, brittle, or visibly deteriorated
- Active leaks or moisture and humidity building under tiles in the valleys
- Sagging in the deck or rafters, which points to trapped moisture or structural strain
- Repeated repairs in the same areas that no longer hold
If the tiles pass but the underlayment fails, a relay is the fix. If both fail, price a full replacement. For isolated damage, start with a repair. The Roofing Brief covers that path in detail in our guide to tile roof repair cost.
Concrete versus clay tile: does replacement cost differ?
Concrete and clay tile install the same way, but they price differently: concrete tile material runs $3 to $5 per square foot against roughly $10 to $18 installed for clay. Clay tile also resists fading and salt air better, and can last 50 to 100 years. Both are heavy enough to require framing that is rated for tile.
| Factor | Concrete tile | Clay tile |
|---|---|---|
| Material cost | $3 to $5 per sq ft | Higher, often $10 to $18 per sq ft installed |
| Weight per square | About 900 to 970 lb (Eagle standard weight); 550 to 720 lb (Eaglelite) | About 900 to 1,575 lb depending on profile (Ludowici product data; its LudoSlate and LudoShake profiles weigh under 600 lb per square per the Ludowici FAQ); needs rated framing |
| Typical lifespan | 50 years or more | 50 to 100 years |
| Installed cost | $7 to $19 per sq ft | Higher across the range |
If you are weighing a switch, compare the full picture in our breakdown of clay tile roof cost and lifespan before you commit to either material.
How to hire a concrete tile roofer and compare quotes
Vet a tile roofer on tile experience specifically, because tile is a different craft from shingles and a relay means lifting every tile once. Get at least three itemized bids, and require each one to separate the relay option from full replacement so you can see what you are actually paying for tiles versus underlayment and labor.
- Confirm the contractor has done concrete tile relays, not only shingle roofs
- Require an itemized quote that lists tile reuse, breakage allowance, underlayment spec, and tear-off separately
- Check licensing, workers compensation, and liability insurance in your state
- Ask which underlayment they spec and what workmanship warranty backs the relay
- Verify they can source matching tiles for the share that breaks during removal (Fixr assumes about 10 percent)
For a full walkthrough of vetting, references, and red flags, use our guide on how to choose a tile roofing company.
Frequently asked questions
How much does it cost to replace a concrete tile roof?
A concrete tile roof replacement costs $7 to $19 per square foot installed, or about $10,500 to $47,500 for a 1,500 to 2,500 square foot roof. A typical 1,700 square foot home runs $20,400 to $31,450. A relay that reuses your existing tiles and only replaces the underlayment costs less; Eagle Roofing Products puts it at about 20 percent less than a complete tile replacement.
Can you reuse concrete roof tiles?
Yes. Concrete tiles usually outlast their underlayment, so roofers commonly strip the tiles, install new underlayment, and reset the same tiles in a job called a relay. Fixr’s pricing assumes roughly 10 percent of tiles break and need matching replacements. Eagle Roofing Products says a lift and re-lay is about 20 percent less in cost than a complete tile replacement.
How long does a concrete tile roof last?
Concrete tiles last 50 years or more with routine inspection and maintenance. The limiting part is not the tile but the underlayment beneath it, which typically needs replacing at about 20 to 30 years, according to Fixr, because tile sheds water but is not itself a waterproof layer. That gap is why many concrete roofs get one or two relays over the life of the tiles.
Do you have to replace the underlayment on a tile roof?
Eventually, yes. Underlayment is the waterproofing layer, and it wears out well before concrete tile does, usually in about 20 to 30 years according to Fixr. When it fails, water reaches the deck even if the tiles look fine. Replacing it means lifting the tiles, which is why a relay, not a repair, is the standard fix for aged underlayment.
Is a concrete tile roof more expensive than shingles?
Yes. Concrete tile costs $7 to $19 per square foot installed, while asphalt shingles typically cost far less per square foot. Tile can also require structural reinforcement because standard-weight concrete tile weighs about 900 to 970 pounds per square, per Eagle’s technical specifications. The tradeoff is lifespan: concrete tile lasts 50 years or more, several times longer than a standard shingle roof.
Does a concrete tile roof need structural reinforcement?
Only if the framing was not designed for tile weight. Standard-weight concrete tile weighs roughly 900 to 970 pounds per square in Eagle’s published data, so switching from shingles to tile can require reinforcement; get an engineer’s assessment and a written price. A home already built for tile needs none. A structural engineer or experienced tile roofer can confirm whether your framing is rated before you commit.
Reviewed by The Roofing Brief Team. Last reviewed: October 2026.