Subscribe

MATERIALS · August 11, 2026

GAF StormGuard Underlayment Review (2026): Specs, vs WeatherWatch

GAF StormGuard vs WeatherWatch: 55 mil film-surfaced, 250°F, shingle and metal vs 73 mil mineral-surfaced for shingles (ICC-ES ESR-1322). Prices, verdict.

By The Roofing Brief Team. Last reviewed: October 2026.

GAF StormGuard vs WeatherWatch comes down to surface and heat: StormGuard underlayment is a nominal 55 mil, film-surfaced leak barrier with a 250°F high-temperature rating for asphalt shingles and most metal roofs, while WeatherWatch is a nominal 73 mil, mineral-surfaced leak barrier sold for asphalt shingle roofs, per ICC-ES evaluation report ESR-1322 (reissued January 2026) and GAF’s sell sheets. So yes, GAF StormGuard is a high-temp membrane. Both share an SBS-modified bitumen core on a fiberglass mat, both meet ASTM D1970, and picking the wrong one usually shows up as a warranty denial or a bond failure, not a leak on day one.

For a cross-brand ranking against Grace and Owens Corning, see our best ice and water shield roundup. This review is compiled from GAF’s StormGuard sell sheet (RESUL116, 6/18), the WeatherWatch sell sheet (RESUL103, 4/17), GAF’s StormGuard application instructions (3/18), ICC-ES ESR-1322, and retailer listings. We did not run hands-on tests.

What is GAF StormGuard underlayment?

GAF StormGuard underlayment is a film-surfaced, SBS-modified bitumen leak barrier reinforced with a fiberglass mat and backed by a self-adhesive with a split-back release film. ESR-1322 describes it as nominally 55 mils (0.055 inch) thick with a polymeric film top surface. It installs as a peel-and-stick membrane over the roof deck in leak-prone zones: eaves, valleys, rakes, and around penetrations. The film surface is what separates it from WeatherWatch and is why GAF sells it for both metal and shingle roofs.

StormGuard carries a high-temperature rating of 250°F (121°C) per GAF’s sell sheet and application instructions, and GAF says it is suitable for most metal roofing systems. It is self-sealing around nail and fastener shanks, which is the core function of any ice-and-water membrane: the sheet grips the nail so wind-driven water and ice-dam backup cannot track down the fastener into the deck. It meets ASTM D1970, the standard for self-adhering polymer-modified bitumen sheets used as ice barriers, and the sell sheet lists a maximum vapor permeance of 0.1 perm and up to 90 days of UV exposure if necessary.

StormGuard vs WeatherWatch: full spec comparison

StormGuard and WeatherWatch share the same fiberglass mat reinforced, SBS-modified bitumen core in ESR-1322, then diverge on surface, thickness, temperature, roll size, and the roofs GAF sells them for. StormGuard is the 55 mil film-surfaced, 250°F, metal-compatible sheet; WeatherWatch is the 73 mil mineral-surfaced sheet whose warranty terms on its sell sheet cover asphalt shingle roofs only.

Spec StormGuard (film-surfaced) WeatherWatch (mineral-surfaced) Source
Surface Polymeric film Mineral fines ESR-1322
Nominal thickness 55 mils (0.055 in) 73 mils (0.073 in) ESR-1322
Core SBS-modified bitumen, fiberglass mat SBS-modified bitumen, fiberglass mat ESR-1322
High-temperature rating 250°F (121°C) None listed on the sell sheet GAF sell sheets
Roll coverage 2.0 square (200 sq ft) only 1.5 square (150 sq ft) or 2.0 square (200 sq ft) GAF sell sheets
Roll dimensions 36 in x 66.7 ft 36 in x 50 ft (1.5 sq) or 36 in x 66.7 ft (2 sq) GAF sell sheets
Roof compatibility Asphalt shingles and most metal roofing; call GAF for copper and zinc Warranty terms cover asphalt shingle roofs GAF sell sheets and instructions
Code listing ASTM D1970, ICC-ES ESR-1322, Miami-Dade and Florida approved ASTM D1970, ICC-ES ESR-1322, Miami-Dade and Florida approved GAF sell sheets
Warranty Lifetime ltd. on Lifetime Shingle roofs; up to 25 yr on non-Lifetime shingle roofs; up to 10 yr under approved non-asphaltic coverings Lifetime ltd. on Lifetime Shingle roofs; up to 25 yr on non-Lifetime shingle roofs GAF sell sheets
Price, 2-square roll (Oct 19, 2026 listings) $90 to $167 $80.52 to $134.99 Google Shopping retailer listings

The counterintuitive detail is thickness. WeatherWatch is the thicker sheet at 73 mils, yet StormGuard is the more versatile one. StormGuard’s film surface and 250°F rating are what let it live under metal panels, which can run hotter than shingles, while WeatherWatch’s mineral surface is designed to sit under asphalt shingles.

Where to use StormGuard vs WeatherWatch

Use StormGuard under metal roofs and anywhere a smooth bonding surface or a 250°F rating is needed. Use WeatherWatch under standard asphalt shingle roofs at eaves, valleys, and penetrations. Neither is evaluated below 2:12: ESR-1322 limits both to roofs with a slope of 2:12 or greater, plywood substrates, mechanically fastened roof coverings, and ventilated attics or rafter spaces.

  • Metal panel roofs: StormGuard. GAF’s sell sheet caps it at an up-to-10-year limited warranty under approved non-asphaltic coverings, and GAF asks installers to call 1-800-ROOF-411 before using it under copper or zinc.
  • Asphalt shingle eaves and valleys: Either works, and both qualify for the lifetime limited warranty on GAF Lifetime Shingle roofs; WeatherWatch is GAF’s designated shingle-roof leak barrier and costs less per roll.
  • Slopes under 2:12: Neither. ESR-1322 limits both membranes to 2:12 and steeper, so low-slope sections need a low-slope membrane system.
  • Full-deck coverage in severe ice-dam climates: Possible with either under GAF’s full-deck guidance, but the ESR-1322 conditions (2:12 minimum, ventilated attic, plywood deck) still apply. Confirm the assembly against local code.

StormGuard vs WeatherWatch decision table

If your roof has Use Rule source
Steel or aluminum panels StormGuard (250°F rating); up to 10-year ltd. warranty GAF StormGuard sell sheet
Copper or zinc roofing Call GAF Technical Services (1-800-ROOF-411) before choosing either GAF StormGuard application instructions
GAF Lifetime Shingles plus at least 3 qualifying GAF accessories Either; both qualify for the lifetime limited accessory warranty GAF sell sheets
Non-Lifetime shingles Either; up to 25-year limited warranty GAF sell sheets
Slope under 2:12 Neither; use a low-slope membrane ICC-ES ESR-1322, section 5.3
Air or deck temperature under 45°F or over 120°F Wait; neither may be applied ESR-1322 section 4.0 and GAF instructions
Membrane left uncovered more than 90 days Neither; StormGuard is rated for up to 90 days of UV exposure GAF StormGuard sell sheet
Ice-dam climate (January average 25°F or lower) Run either at the eaves to at least 24 in past the interior line of the exterior wall GAF sell sheets; ESR-1322 section 4.0
Small eaves-only job under 150 sq ft WeatherWatch 1.5-square roll; StormGuard only comes in 2-square rolls GAF sell sheets

Both membranes are for critical transition zones by default, not the whole deck. GAF’s application instructions call for 6 in end laps, 3 in side laps between courses, back-nailing the selvage edge every 18 in, and priming concrete or masonry with an ASTM D41 primer such as Matrix 307. For the code side of when ice barrier is mandatory, see our breakdown of ice dam protection membrane code requirements under IRC R905.1.2.

How much does GAF StormGuard cost?

GAF StormGuard costs about $90 to $167 for a 2-square roll covering 200 square feet, or about $45 to $84 per square before labor, based on Google Shopping retailer listings checked October 19, 2026. WeatherWatch 2-square rolls listed at $80.52 to $134.99 on the same date. Retail pricing moves by region, retailer, and season, so treat these as planning ranges, not quotes.

Product (2-square roll) Retailer listing Price Date checked
StormGuard A+ Roofing Supply $90.00 Oct 19, 2026
StormGuard Woodson Lumber $119.00 Oct 19, 2026
StormGuard Go Build Supply $119.90 Oct 19, 2026
StormGuard Arbor $166.98 Oct 19, 2026
WeatherWatch Lowe’s $80.52 Oct 19, 2026
WeatherWatch Builders Warehouse $99.97 Oct 19, 2026
WeatherWatch Moscow and Pullman Building Supply $134.99 Oct 19, 2026

Because both are sold only in full rolls, a small job that only needs eaves and valleys still buys a full 1.5 or 2.0 square roll. On a 30-square (3,000 sq ft) shingle replacement, two 2-square rolls of StormGuard at $119 add $238, or 1.0% to 1.6% of the $15,000 to $24,000 that the $5 to $8 per sq ft architectural asphalt range in our 2026 roofing cost report implies. For where ice-and-water sits inside a full roof budget, see our guide to ice and water shield cost per square and when you need it.

GAF StormGuard vs Grace Ice and Water Shield

Grace Ice and Water Shield is the rubberized-asphalt benchmark most roofers compare GAF against; ICC-ES ESR-1677 (reissued January 2026) now lists it under report holder CertainTeed LLC as VYCOR Ice & Water Shield. The core difference is chemistry and thickness. GAF uses a 55 mil SBS-modified bitumen membrane on a fiberglass mat, while the Grace product is a 40 mil rubberized-asphalt membrane with an embossed polyethylene film. Both self-seal around fasteners and both meet ASTM D1970.

For hot metal assemblies, the Grace line has a separate high-temperature product, VYCOR Ice & Water Shield HT, also 40 mils in ESR-1677, while GAF covers metal with standard StormGuard’s 250°F rating. GAF StormGuard’s main advantage is warranty integration when the whole roof is a GAF system. If you are choosing across brands rather than within GAF, our 2026 ice and water shield comparison ranks Grace, GAF, and Owens Corning side by side. For metal-specific membrane selection, see our metal roof underlayment guide.

Is GAF StormGuard worth it?

GAF StormGuard is worth it when the roof is already a GAF system and you want the leak barrier to count toward the lifetime limited warranty (Lifetime Shingles plus at least three qualifying GAF accessories), or when you need one membrane rated to 250°F that works under both metal and shingle. At $90 to $167 per 2-square roll in October 2026 listings it costs more per roll than WeatherWatch, and it makes the most sense as part of GAF’s warranty system rather than as a standalone bargain.

Verdict: a strong buy inside a GAF system, especially for steel or aluminum roofs where its film surface and 250°F rating earn their place. For a shingle-only roof, WeatherWatch (73 mils, from $80.52 per 2-square roll) is GAF’s intended pick, and cross-shopping the 40 mil Grace membrane is worth doing on price.

Frequently asked questions

What is the difference between GAF StormGuard and WeatherWatch?

StormGuard is film-surfaced, nominally 55 mils thick, rated to 250°F, and sold for asphalt shingle and most metal roofs. WeatherWatch is mineral-surfaced, thicker at a nominal 73 mils, and its warranty terms cover asphalt shingle roofs. Both share an SBS-modified bitumen core on a fiberglass mat and are listed in ICC-ES ESR-1322. Use film StormGuard for metal, mineral WeatherWatch for shingle.

Can GAF StormGuard be used under a metal roof?

Yes. StormGuard’s polymeric film surface and 250°F rating make it GAF’s leak barrier for most metal roofing systems; for copper or zinc, GAF asks installers to call 1-800-ROOF-411 first. GAF limits StormGuard to an up-to-10-year limited warranty under approved non-asphaltic coverings such as metal, versus lifetime coverage on a GAF Lifetime Shingle roof.

How much does a roll of GAF StormGuard cost?

A 2-square roll of StormGuard covering 200 square feet listed at $90 to $167 across retailers on October 19, 2026, or about $45 to $84 per square before labor. WeatherWatch 2-square rolls listed at $80.52 to $134.99. Confirm current local pricing before budgeting a job.

Is GAF StormGuard the same as ice and water shield?

Yes, StormGuard is GAF’s brand of ice-and-water shield, also called a leak barrier. ESR-1322 recognizes it as an alternate to the ice dam membrane in Chapter 9 of the IRC: a self-adhering, self-sealing sheet that grips fasteners and blocks wind-driven rain and ice-dam backup at eaves, valleys, and penetrations. Ice and water shield is the category; StormGuard is one product within it.

Do you need ice and water shield on the whole roof?

Usually no. GAF’s sell sheets note that most codes require a leak barrier at the eaves where the January average temperature is 25°F or lower, and ESR-1322 requires it to extend at least 24 inches past the interior line of the exterior wall. Valleys and penetrations are the other standard zones. Full-deck coverage is a specific assembly used in severe climates, and some jurisdictions require it.

What temperature can GAF StormGuard withstand?

StormGuard has a high-temperature rating of 250°F (121°C), which is why GAF sells it for most metal roofing systems that run hotter than shingle roofs. WeatherWatch’s sell sheet lists no high-temperature rating. Both must be applied when air and deck temperatures are between 45°F and 120°F.