By The Roofing Brief Team. Last reviewed: October 2026.
Steel roofs come with one of two metallic coatings, and a Galvalume steel roof (steel sheet coated with about 55% aluminum, 43.4% zinc and 1.6% silicon to ASTM A792) gives at least twice the corrosion protection of G90 galvanized steel, per the Cleveland-Cliffs GALVALUME data sheet. Cliffs projects a 40 to 60 year service life for Galvalume in rural and industrial air, and Englert gives 40 to 70 years against 20 to 50 for galvanized. Three choices decide where your roof lands in those ranges: the coating (galvanized or Galvalume, bare or painted), the gauge (thickness), and the panel profile. Near saltwater the warranty is the warning sign: Englert’s sample warranty offers no coverage at all on Galvalume within one-half mile of the seacoast.
For the wider category, see our metal roofing types comparison and metal roof cost breakdown.
What is a steel roof, and what are steel roof panels made of?
A steel roof is built from cold-rolled steel sheet that is hot-dip coated for corrosion resistance, then roll-formed into panels or stamped into shingles. Bare steel rusts fast, so every steel roofing product carries a metallic coating: zinc to ASTM A653 (galvanized) or aluminum-zinc to ASTM A792 (Galvalume), usually with a paint layer on top. The steel supplies strength; the coating weight, in ounces per square foot, supplies the lifespan.
Steel roof panels start as steel coil, typically 22 to 29 gauge, that runs through a hot-dip line where molten zinc or zinc-aluminum bonds to both faces. The gauge and coating of that roofing sheet metal drive both its lifespan and its price per sheet. The coil is then painted (commonly a PVDF or SMP finish) and formed into standing seam, corrugated, or R-panel profiles, or stamped into steel shingles and tiles. Contractors who roll panels on site buy that metal roofing coil directly, usually 24 gauge Galvalume slit to 16 to 24 inches wide for standing seam.
Galvanized vs Galvalume steel roofing: which coating lasts longer?
Galvalume outlasts galvanized steel because its coating blends aluminum with zinc. Cleveland-Cliffs rates Galvalume at no less than twice the corrosion resistance of G90 galvanized, and Sheffield Metals puts the gap at two to four times. The aluminum forms a stable barrier across the face of the panel and the zinc protects cut edges, which is why Galvalume commonly reaches 40-plus years while Sheffield cites studies putting galvanized roofs near 15 to 20 years.
The two coatings are specified by weight: the number is the minimum triple-spot average for both sides in ounces per square foot, per the U.S. Steel ASTM coating weight bulletin that McElroy Metal publishes. Galvanized is graded G-90 (0.90 oz of zinc). Galvalume comes as AZ50 (0.50 oz), the usual substrate under paint, and AZ55 (0.55 oz) for bare, acrylic-coated panels, per Sheffield Metals. Ask for the coating designation in writing; it is one of the first line items to check on a metal roof estimate.
| Property | Galvanized steel | Galvalume steel | Source |
|---|---|---|---|
| Coating | Zinc, G-90 = 0.90 oz/sq ft | 55% aluminum, 43.4% zinc, 1.6% silicon; AZ50 = 0.50 oz, AZ55 = 0.55 oz | U.S. Steel bulletin via McElroy; Sheffield Metals |
| Corrosion resistance | Baseline | At least 2 times (Cliffs); 2 to 4 times (Sheffield) | Cleveland-Cliffs; Sheffield Metals |
| Typical field life | 15 to 20 years (Sheffield); 20 to 50 years (Englert) | 40 to 60 years projected (Cliffs); 40 to 70 years (Englert) | Named makers |
| Cut-edge behavior | Less edge rust in the first years | Slight edge rust that stops increasing after about 2 years | Cliffs (under 10 years); U.S. Steel bulletin |
| Best for | Pig barns, tight bends, stamped shingles | Most residential and commercial roofs | Cleveland-Cliffs; Sheffield Metals |
| Price | Similar at the same gauge | Similar at the same gauge | Cliffs (prepainted); HomeGuide $500 to $1,300 per square installed for both |
One reversal matters: galvanized still wins in pig barns. Cleveland-Cliffs lists pig barns and humid bulk fertilizer (potash) storage as places Galvalume should not be used, and allows it in cattle, poultry and horse buildings only with proper waste management, ventilation and insulation. Galvanized also bends more cleanly, which is why many stamped steel shingles and flashings use it, per Sheffield Metals.
Galvalume vs painted metal roof: bare or painted?
Painted panels use the lighter AZ50 Galvalume under a factory paint system, while bare panels use AZ55 with a clear acrylic coat, per Sheffield Metals, so “Galvalume vs painted” is usually a choice between two Galvalume products. The warranties differ: Englert’s sample U.S. roof warranty gives mill finish Galvalume 25 years on AZ55 and 20 years on AZ50, while its prepainted Galvalume carries 25 years on the Galvalume plus 35 years on its PermaColor 3500 ULTRA-Cool paint, beyond one-half mile from salt or brackish water.
| If you want… | Choose | Why (source) |
|---|---|---|
| The lowest panel price, barns and sheds | Bare AZ55 Galvalume, 29 or 26 gauge | HomeGuide: 29 gauge $1 to $3 per sq ft material |
| A color, or a home in an HOA | Painted AZ50 Galvalume with PVDF | Englert: 35-year paint warranty on PermaColor 3500 |
| The longest published substrate warranty | Ask for U.S. Steel coil | U.S. Steel: 45 years AZ55 bare, 50 years AZ50 painted (McElroy, May 2023) |
| A site within one-half mile of salt water | Aluminum, not Galvalume | Englert: no Galvalume warranty inside one-half mile |
| Contact with concrete, mortar or treated lumber | Painted panels with separation, or a different metal | Cliffs: bare and prepainted Galvalume corrode rapidly against curing concrete |
| A pig barn | Galvanized G-90 | Cliffs: Galvalume not recommended in pig barns |
Bare Galvalume is reflective but not cool by code: Cliffs lists an initial solar reflectance of 0.78 and 0.58 after 3 years, with thermal emissivity of only 0.08 and an SRI that falls from 75 to 34. A light PVDF paint has much higher emittance, so check the painted panel’s CRRC listing if a cool roof rule applies. The substrate warranty has also grown: per McElroy Metal, U.S. Steel raised its Galvalume warranty from 20 years to 45 years for AZ55 bare acrylic product and 50 years for AZ50 painted product in 2023.
What does steel roof gauge mean, and which gauge should you buy?
Gauge is the thickness of the steel sheet, and a lower number means thicker metal. In residential roofing the common gauges are 29, 26, and 24. Two tables are in use: the Manufacturers’ Standard Gauge for bare steel (29 = 0.0135 in, 26 = 0.0179 in, 24 = 0.0239 in) and the federal U.S. Standard Gauge in 15 U.S.C. 206 (29 = 0.0140625 in, 26 = 0.01875 in, 24 = 0.025 in). Thicker steel resists denting, oil-canning, and wind uplift better, but costs more.
For most homes, 26-gauge is the practical floor and 24-gauge is the upgrade for standing seam, high-wind, or hail-prone regions. 29-gauge suits sheds, barns, and low-exposure outbuildings but flexes and dents more easily. On HomeGuide’s metal roof cost guide (November 21, 2025) the material price steps from $1.50 to $5.00 per square foot at 26 gauge to $3.00 to $7.00 at 24 gauge. For the full 26 vs 29 comparison, see our 26 vs 29 gauge metal roofing thickness guide.
| Gauge | Manufacturers’ Standard (bare steel) | U.S. Standard (15 U.S.C. 206) | Material price per sq ft (HomeGuide) | Best use |
|---|---|---|---|---|
| 29 | 0.0135 in | 0.0140625 in | $1.00 to $3.00 | Sheds, barns, budget outbuildings |
| 26 | 0.0179 in | 0.01875 in | $1.50 to $5.00 | Standard residential panels |
| 24 | 0.0239 in | 0.025 in | $3.00 to $7.00 | Standing seam, high wind, hail zones |
| 22 | 0.0299 in | 0.03125 in | $4.00 to $8.00 | Commercial, extreme exposure |
How much does a steel roof cost per square foot in 2026?
A steel roof costs $5 to $13 per square foot installed for galvanized or Galvalume panels, per HomeGuide’s November 2025 metal roof guide, which also lists both coatings at $500 to $1,300 per square installed and $7,500 to $32,500 for a full roof. Standing seam runs $9 to $16 per square foot installed and corrugated $5 to $12 on the same guide.
Price drivers, from largest to smallest: profile (HomeGuide puts concealed-fastener panels at $900 to $1,600 per square against $500 to $1,200 for exposed fastener), gauge (26 to 24 gauge roughly doubles the low end of material price), paint system (PVDF costs more than SMP), and roof complexity. Coating barely moves the price: Cliffs says prepainted Galvalume sells at a similar price per square meter to prepainted galvanized of the same gauge. For one brand’s standing seam pricing, see our Englert metal roofing review.
- Corrugated and R-panel steel: lowest installed cost at $5 to $12 per square foot (HomeGuide), exposed-fastener panels for barns, sheds, and budget homes. See our corrugated metal roofing guide.
- Standing seam steel: concealed fasteners at $9 to $16 per square foot installed (HomeGuide), cleaner look, best water and wind performance.
- Stamped steel shingles and tiles: mimic asphalt, slate, or clay; often galvanized for cleaner stamping, per Sheffield Metals.
Why do steel roofs rust, and where does it start?
Steel roofs rust because the base metal is iron-based and will oxidize once its coating is breached. Intact galvanized or Galvalume rarely rusts across the field. The failure points are cut edges, scratches, drilled holes, and scribe lines, plus contact with the wrong neighbors: Cliffs warns against lead flashings, copper-bearing pressure treated lumber and curing concrete or mortar, and Sheffield adds copper and brick.
Galvalume behaves differently at cut edges than galvanized. Cliffs says galvanized may show less red rust at cut edges in the short term, under about 10 years depending on the environment, but its zinc then deteriorates faster at edges and across the panel. The U.S. Steel GALVALUME bulletin reports that edge creep on prepainted Galvalume is slight and stops increasing after 2 years. Hemming or sealing cut edges and touching up scratches slows it further. The same cut-edge rules apply to matching galvanized steel gutters. For a fuller view of how metal ages, see the 2026 Roofing Material Lifespan Report.
Steel vs aluminum roof: when does aluminum win?
Aluminum beats steel near saltwater, where steel corrodes and coated-steel warranties end: Englert offers no warranty on Galvalume within one-half mile of the seacoast, and Sheffield Metals lists typical Galvalume exclusions within 1,500 feet of breaking surf, 800 feet of a large bay and 400 feet of a marsh. Inland, steel usually wins on cost and stiffness: HomeGuide prices aluminum at $700 to $1,700 per square installed against $500 to $1,300 for Galvalume.
| Factor | Steel roof | Aluminum roof | Source |
|---|---|---|---|
| Coastal warranty (Englert) | None for Galvalume within one-half mile of salt water | Prepainted aluminum offered inside one-half mile, with annual maintenance | Englert sample warranty |
| Strength and dent resistance | Stiffer at equal thickness | Softer, dents more easily | Material property |
| Installed cost per square | $500 to $1,300 (Galvalume) | $700 to $1,700 | HomeGuide, Nov 2025 |
| Density | About 7.85 g/cm3 | About 2.70 g/cm3, roughly one-third of steel | Standard material values |
| Best climate | Inland, hail-prone, budget-driven | Within one-half mile of salt or brackish water | Editorial, from the rows above |
A practical rule: inside the one-half mile line, price aluminum first, because the Galvalume warranty is gone there. Between one-half mile and a few miles, ask the panel maker to confirm the warranty for your address in writing. For a broader material decision, our metal roofing types guide compares steel, aluminum, zinc, and copper side by side.
What is weathering steel (Corten) roofing?
Weathering steel, sold under names like COR-TEN, is an uncoated steel alloy that forms a stable rust-colored patina instead of relying on a metallic coating. HomeGuide prices rusted (Corten) roofing at $600 to $1,100 per square installed and notes the patina develops within a few months. It is not a maintenance-free choice: the patina protects the surface but the runoff stains adjacent materials and the steel can keep corroding at ledges where water pools.
Weathering steel suits carefully detailed architectural roofs, not typical residential re-roofs. It needs drainage that never lets water sit, and runoff can stain concrete, siding, and landscaping below. If you want the rusted look without those risks, a pre-painted rusted-finish panel on AZ50 Galvalume keeps a substrate warranty, such as the 25 years Englert offers on prepainted Galvalume beyond one-half mile from salt water.
How long does a steel roof last?
A properly installed steel roof lasts about 40 to 70 years with Galvalume, per Englert, and Cleveland-Cliffs projects 40 to 60 years in rural and industrial air with at least 35 years before major maintenance. Galvanized runs shorter: 15 to 20 years in the studies Sheffield Metals cites and 20 to 50 years in Englert’s range. Paint system, gauge, climate, and edge detailing move the number within each band.
To reach the top of the range: choose Galvalume (or aluminum within one-half mile of salt water), 24 or 26 gauge, a PVDF paint finish with a published paint warranty, and an installer who hems cut edges and keeps the panels off lead, copper and wet concrete. Skipping any of those, especially near salt air or with thin 29-gauge on an exposed roof, pulls the lifespan toward the bottom.
Frequently asked questions
Is a steel roof better than aluminum?
Steel is better for most inland homes because it is stiffer at equal thickness and HomeGuide prices Galvalume at $500 to $1,300 per square installed against $700 to $1,700 for aluminum. Aluminum is better within one-half mile of salt or brackish water, where Englert offers no Galvalume warranty.
What is the difference between galvanized and Galvalume steel roofing?
Galvanized steel is coated with zinc (G-90 = 0.90 oz per sq ft), while Galvalume is coated with 55% aluminum, 43.4% zinc, and 1.6% silicon (AZ50 or AZ55). Cleveland-Cliffs rates Galvalume at least twice as corrosion resistant, but galvanized bends more cleanly and is the pick for pig barns.
What gauge steel roof is best?
For most homes, 26-gauge (0.0179 in on the Manufacturers’ Standard Gauge) is the practical standard and 24-gauge (0.0239 in) is the upgrade for standing seam, high wind, or hail. HomeGuide prices 24-gauge material at $3 to $7 per square foot against $1.50 to $5 for 26-gauge. 29-gauge suits sheds and barns.
Do steel roofs rust?
Coated steel rarely rusts across the field, but it can rust at cut edges, scratches, and fastener holes where bare steel is exposed. On prepainted Galvalume, U.S. Steel reports edge creep is slight and stops increasing after 2 years. Hemming or sealing cut edges and touching up scratches keeps rust from starting.
How much does a steel roof cost in 2026?
HomeGuide puts a galvanized or Galvalume steel roof at $5 to $13 per square foot installed, or $7,500 to $32,500 for a full roof, with standing seam at $9 to $16 per square foot. Profile, gauge and paint system move the price more than the choice of coating.
How long do steel roofs last?
Galvalume steel roofs last about 40 to 70 years per Englert, and Cleveland-Cliffs projects 40 to 60 years in rural and industrial environments. Galvanized runs 15 to 20 years in the studies Sheffield Metals cites and 20 to 50 years in Englert’s range. Coating, gauge, paint finish, climate, and edge detailing set where a roof lands.
Is a Galvalume steel roof better painted or unpainted?
Painted AZ50 Galvalume adds color and a separate paint warranty (35 years on Englert’s PermaColor 3500), while bare AZ55 costs less and carries a 25-year Englert substrate warranty. Bare Galvalume’s solar reflectance drops from 0.78 to 0.58 after 3 years, per Cleveland-Cliffs, so choose painted if a cool roof rule or appearance matters.