By The Roofing Brief Team | Last reviewed: November 2026
Correction, November 14, 2026: an earlier version said the review drew every figure from dated Petersen documents, although it also uses HomeAdvisor and retailer data for installed cost, and it said PAC-CLAD offers 7 roof profiles while the table listed 6; Petersen’s menu lists 7 products because PAC-150 appears as both a 90 degree and a 180 degree seam. A second check the same day corrected further attributions and figures against their cited sources.
PAC-CLAD is the metal roofing, wall panel, soffit and flat-sheet brand of Petersen Aluminum Corporation, a company founded in Chicago in 1965, headquartered in Elk Grove Village, Illinois, and owned by Carlisle Companies since 2019, per Petersen’s own company history. Its painted panels carry a 35-year non-prorated finish warranty on standard 70% PVDF (Kynar 500-based) colors, issued on forms dated January 1, 2025, and it sells through contractors, distributors and five Petersen facilities rather than big-box stores.
PAC-CLAD is a manufacturer’s brand, not a roofing contractor, so a local company with “clad” or “PAC” in its name is a separate business. “Clad metal roofing” is also used loosely for any metal panel used as a wall finish; this review covers only Petersen’s products, from standing seam roofs like Snap-Clad and Tite-Loc Plus to the 7.2 Panel and Board and Batten siding. Figures below come from Petersen documents, ICC-ES and Miami-Dade County records, press releases and retail listings, plus HomeAdvisor and our own cost guide for installed-cost context, each linked where it first appears.
PAC-CLAD key numbers at a glance
PAC-CLAD lists 7 standing seam roof products on its November 2026 product menu (PAC-150 appears twice, as a 90 degree and a 180 degree seam, so the profile table below has 6 rows), 28 standard PVDF colors, panels up to 64 ft long from the factory, and a 20-year weathertightness warranty on qualifying roofs. The table pulls the figures most buyers search for from Petersen’s warranty forms, spec sheets and color chart.
| Item | PAC-CLAD figure | Source |
|---|---|---|
| Maker and parent | Petersen Aluminum Corporation, a Carlisle company; deal agreed December 10, 2018 for about $197 million | Carlisle release on pac-clad.com |
| Finish warranty, standard PVDF | 35 years chalk, fade (5 Hunter delta E) and film integrity; 25 years substrate on Galvalume | 35-year Galvalume warranty form |
| Weathertightness warranty | 20 years, four types (Sidelap, Standard, NDL, Single Source NDL) | PAC-CLAD WTW page |
| Lowest roof slope | 1/2:12 for Tite-Loc, Tite-Loc Plus and PAC-150 180 degree double lock | ICC-ES ESR-4173, Table 3 |
| Metals and thickness | 24 and 22 gauge Galvalume steel; .032 to .063 in painted aluminum; 16 oz copper on Snap-Clad | ESR-4173 Section 3.1; PAC-CLAD spec sheets dated 7/26 |
| Flat sheet retail price | $130.99 per 48 in x 120 in sheet, 24 gauge, standard color (about $3.27 per sq ft) | Rapid Materials listing, as listed November 2026 |
Who makes PAC-CLAD, and is it a Carlisle company?
Yes. PAC-CLAD is made by Petersen Aluminum, which Carlisle Companies (NYSE: CSL) agreed to buy on December 10, 2018 for about $197 million and, per Petersen’s history page, completed in 2019. ICC-ES now lists the report holder as “Petersen Aluminum, a Division of Carlisle Architectural Metals,” and the 2026 weathertightness warranty is issued by “PAC-CLAD, A Carlisle Company.”
Maurice “Maury” Petersen opened the business in February 1965 in a Chicago office that rented for $75 a month, moved to Schiller Park, Illinois in July 1972 to run an aluminum anodizing line, and built the Elk Grove Village headquarters in 1994. The name “Petersen Aluminum” comes from those years as an aluminum mill distributor, which is why the company still stocks anodizing-quality 5005-H34 and 3003-H14 aluminum sheet in .032 to .125 in, per its coil and flat sheet page. In the 2018 release, Carlisle named Drexel Metals, Sunlast Metal and Premium Panels as its earlier metal roofing buys, so Drexel is now a sister brand.
| Facility | Opened (per PAC-CLAD) | Profiles the facility lists | Source |
|---|---|---|---|
| Elk Grove Village, Illinois (HQ) | HQ built 1994 | All roof profiles, all wall and soffit panels, composite (MCM) panels, column covers | Illinois page |
| Baltimore, Maryland | 1990 | Snap-Clad, Tite-Loc, Tite-Loc HS, Tite-Loc Plus, Snap-On, Redi-Roof Batten; M-36 and R-36 wall panels | Maryland page |
| Tyler, Texas | 1985 | Snap-Clad, Tite-Loc, Tite-Loc Plus, Snap-On | Texas page |
| Acworth, Georgia | 1998 | Full roof, wall and soffit range in aluminum, steel, copper and zinc; field forming and curving | Georgia page |
| Phoenix, Arizona | 2017 | Snap-Clad, Tite-Loc, Tite-Loc Plus, PAC-150; Precision Series and 7.2 wall panels; PAC-850 soffit | Arizona page |
Older Petersen UL sheets still print Minnesota addresses in Andover and Fridley, but neither appears on the five-facility list on the PAC-CLAD locations page in November 2026.
Is PAC-CLAD aluminum or steel?
PAC-CLAD is both: the brand covers painted aluminum, painted Galvalume steel, anodized aluminum, copper and zinc, and most roof profiles come in at least one steel and one aluminum gauge. Steel panels use ASTM A792 AZ50 Galvalume at 24 gauge (0.024 in) minimum, and aluminum panels use ASTM B209 sheet at 0.032 in minimum, per ICC-ES ESR-4173 Section 3.1.
The choice matters most near salt water. Petersen’s Galvalume warranty excludes jobs closer than 2,800 ft to a seacoast, 1,200 ft to a large bay or 600 ft to a canal or brackish water. The aluminum form keeps coverage inside those distances, with 25 years on substrate instead of 30, if the owner rinses the panels with fresh tap water twice a year per AAMA 609 and 610 and keeps records. Petersen’s Snap-Clad and Tite-Loc pages also require aluminum panels with stainless steel clips on coastal jobs for the finish warranty to apply. For the general trade-off, see our aluminum vs steel roofing comparison.
PAC-CLAD standing seam roof panels compared
The 7 PAC-CLAD roof products on the menu are 6 profiles once the two PAC-150 seam types are counted together; they split into snap-lock panels (Snap-Clad, Snap-On) that install without a seaming machine and mechanically seamed panels (Tite-Loc, Tite-Loc Plus, PAC-150 in 90 or 180 degree seam, PAC T-250) that need a mechanical seamer and are evaluated down to 1/2:12. Seam height ranges from 1 in on Snap-On to 2.625 in on PAC T-250.

| Profile | Seam and lock | Widths (nominal) | Metals | Minimum slope | Max factory length | Source |
|---|---|---|---|---|---|---|
| Snap-Clad | 1-3/4 in, snap lock | 10, 12, 16, 18 in | 24, 22 ga steel; .032, .040 aluminum | 2:12 (ESR-4173) | 64 ft | Snap-Clad spec sheet 7/26 |
| Snap-On Standing Seam | 1 in, snap-on | 12, 16, 18, 20 in | 24 ga steel; .032 aluminum | 3:12 over solid deck | 35 ft | Snap-On page |
| Tite-Loc | 2 in, 90 degree mechanical | 12, 16, 18 in | 24, 22 ga steel; .032, .040 aluminum | 1/2:12 | 64 ft | Tite-Loc spec sheet 7/26 |
| Tite-Loc Plus | 2 in, 180 degree mechanical | 12, 16, 18 in | 24, 22 ga steel; .032, .040 aluminum | 1/2:12 | Varies by plant | Tite-Loc Plus spec sheet 7/26 |
| PAC-150 (90 or 180 degree) | 1-1/2 in, mechanical | 12, 16, 18, 20 in | 24 ga steel; .032 aluminum | 1:12 on Petersen’s page; 1/2:12 for the 180 degree version in ESR-4173 | 64 ft, longer if field formed | PAC-150 spec sheet 7/26 |
| PAC T-250 | 2.625 in, mechanical, bi-directional | Not listed on page | 24, 22 ga steel; .032, .040 aluminum | 1/2:12 | 54 ft | PAC T-250 page |
Two details on that table trip up buyers. Snap-Clad carries a UL 580 Class 90 uplift rating only on steel panels up to 18 in on center and aluminum panels up to 16 in, so an 18 in aluminum Snap-Clad has its own “NO UL 90” specification file. PAC-150’s minimum slope is stated as 1:12 on Petersen’s product page but 1/2:12 for the 180 degree double lock in ICC-ES ESR-4173 Table 3, so use the evaluation report figure only for the assembly it describes. For seam types in general, see our snap-lock vs mechanical seam guide.
PAC-CLAD wind, fire and hail ratings
Tite-Loc, Tite-Loc Plus and Snap-Clad spec sheets list UL 580 Class 90 uplift, UL 1897 uplift, UL 790 Class A fire, UL 263 fire resistance and UL 2218 impact ratings, plus ASTM E1592, E1680 and E1646 tests. Each rating belongs to a listed assembly with a named deck, clip and spacing, so the panel name alone does not prove a rating on your roof.
ICC-ES ESR-4173, reissued September 2025 and revised June 2026, shows how far apart those assemblies sit. Its Table 2 gives an allowable uplift of 127 psf for .032 aluminum Tite-Loc with sliding clips at 30 in on center over 19/32 in plywood, but 37 psf for 24 gauge steel Tite-Loc with clips at 48 in on plywood. The same report requires solid decking of at least 15/32 in plywood or 7/16 in OSB, or 22 gauge steel deck, under all four evaluated profiles.
| Rating or approval | What PAC-CLAD documents show | Applies to | Source |
|---|---|---|---|
| ICC-ES ESR-4173 uplift, system W-1 | 127 psf allowable | .032 aluminum Tite-Loc, max 18 in wide, clips 30 in o.c., two #10-12 screws | ESR-4173 Table 2 |
| ICC-ES ESR-4173 uplift, system W-2 | 37 psf allowable | 24 ga steel Tite-Loc, clips 48 in o.c. on plywood | ESR-4173 Table 2 |
| ICC-ES ESR-4173 uplift, systems W-4 to W-6 | 45 psf allowable | PAC-150 180 degree at 36 in o.c.; 24 ga Snap-Clad at 36 in o.c. | ESR-4173 Table 2 |
| UL 580 Class 90 | Listed | Tite-Loc and Tite-Loc Plus to 18 in; Snap-Clad steel to 18 in, aluminum to 16 in; PAC-150 24 ga, UL Construction No. 588 | PAC-CLAD spec sheets 7/26 |
| FM Approved | Listed | 24 and 22 ga Tite-Loc Plus in 12 and 16 in widths over 16 ga open purlins only | Tite-Loc Plus spec sheet 7/26 |
| Miami-Dade NOA | 21 active NOAs, expiring November 9, 2027 to August 5, 2030 | Tite-Loc Plus, Snap-Clad, PAC-150, 5V-Crimp, Edge-Loc 1.0, corrugated wall, PAC-850 soffit, Board and Batten, roof edge systems, PAC-Shield insulation, PAC-CLAD HT underlayment | Miami-Dade product control record |
| Missile impact | SSTD missile impact passed | .032 aluminum and 24 ga steel Tite-Loc Plus | Tite-Loc Plus spec sheet 7/26 |
The Miami-Dade list in November 2026 has no NOA for the 90 degree Tite-Loc, so a High-Velocity Hurricane Zone job in Miami-Dade or Broward needs Tite-Loc Plus, Snap-Clad or PAC-150 instead. For the edge, ridge and penetration drawings behind these listings, see our standing seam metal roof details.
PAC-CLAD wall panels and metal siding products
PAC-CLAD sells metal roofing on walls in three families: exposed-fastener panels (7.2 Panel, R-36, M-36, M-42, 1/2 in and 7/8 in Corrugated), concealed-fastener panels (Flush, Reveal, Board and Batten, Precision Series Box Rib, Highline and HWP) and composite or insulated panels. Box Rib, Highline, HWP, Flush and 7.2 gained ICC-ES evaluation report ESR-5839, per Petersen’s announcement.
| Wall panel | Profile | Coverage or width | Metals | Length limits | Source |
|---|---|---|---|---|---|
| 7.2 Panel | 1-1/2 in rib on 7.2 in centers | 36 in | 24, 22 ga steel; .032, .040, .050 aluminum | 5 ft min; 30 ft steel, 22 ft aluminum | 7.2 spec sheet 7/26 |
| R-36 | 1-1/4 in rib on 12 in centers | 36 in | Same as 7.2 | Same as 7.2 | R-36 spec sheet 7/26 |
| 7/8 in Corrugated | 2.667 in pitch | 37.33 in siding (1 lapped rib); 34.67 in roofing (2 lapped ribs) | Same as 7.2 | Same as 7.2 | Corrugated spec sheet 7/26 |
| 1/2 in Corrugated | 2.667 in pitch | 42.67 in siding; 40 in roofing | Same as 7.2 | Walls and equipment screens, per Petersen | Corrugated spec sheet 7/26 |
| Board and Batten | Batten 2 in wide, 3/4 in deep | Not stated | 24 ga steel; .032 aluminum | 8 ft recommended; 30 ft steel, 22 ft aluminum with oil canning form | Board and Batten page |
| Flush and Reveal | Flat face; Reveal adds a 1-1/2 in channel | Matches roof panel widths | Steel and aluminum | 4 ft min, 25 ft max | Flush and Reveal page |
Board and Batten is the profile homeowners ask about most for residential siding, and Petersen recommends keeping 24 gauge steel and .032 aluminum runs to 8 ft nominal to limit visible oil canning. Longer pieces ship only after the buyer signs an oil canning acknowledgment form, and Petersen states that oil canning “is not a cause for rejection” on every panel page. Our striated vs flat panels oil canning guide explains why striations and pencil ribs reduce it. For costs and code rules across all brands, see our metal wall panels guide.
The same plants roll the trim that finishes a wall. The PAC-850 soffit is .032 aluminum, 12 in wide with a vee groove every 6 in, and comes solid, half vented or fully vented. Petersen also sells coping, fascia and gutter systems; our soffit panels guide and parapet wall roofing detail show where each piece goes.
PAC-CLAD warranty: what the 35-year forms cover
The PAC-CLAD finish warranty runs 35 years on standard PVDF colors for chalking (ASTM D4214 rating 8 or better), color change (5 Hunter delta E units under ASTM D2244) and film integrity, with substrate coverage of 25 years on Galvalume. The forms are do-it-yourself PDFs on the PAC-CLAD finish warranty page, dated January 1, 2025.
| Warranty form | Chalk | Fade | Film integrity | Substrate | Source |
|---|---|---|---|---|---|
| Standard PVDF on Galvalume | 35 yr | 35 yr, 5 delta E | 35 yr | 25 yr; none within 2,800 ft of seacoast | Galvalume form, 1/1/2025 |
| Standard PVDF on aluminum | 35 yr | 35 yr, 5 delta E | 35 yr | 30 yr inland; 25 yr coastal with twice-yearly rinse | Aluminum form, 1/1/2025 |
| Cardinal Red and Award Blue | 10 yr | 10 yr, 7 delta E | 20 yr | 20 yr | CR/AB form |
| Wood grain and Weathered Steel | 30 yr | 20 yr print coat | 40 yr | Paint only; none within 1,500 ft of seacoast | Wood grain form |
| Acrylic-coated AZ55 Galvalume (Galvalume Plus) | None | None | None | 25 yr against rupture or perforation | Acrylic form |
| Perforated PVDF; anodized surface | 20 yr each, per the finish warranty page | Finish warranty page | |||
The fine print is the part most reviews skip. Each finish warranty is non-transferable, excludes roofs flatter than 1/4:12, voids the area under snow guards, solar panels or solar film, and is limited to refinishing or replacement material F.O.B. Petersen’s plant, with no labor and an option to refund the original invoice price instead. Claims go in writing by registered or certified mail to Petersen at 1600 Airport Road, Waukesha, Wisconsin within 30 days of finding the defect, and bends tighter than 2T (metal up to 0.030 in) or 4T (0.031 in and thicker) are excluded.
The weathertightness warranty is a separate, paid product. The Type 2 Standard sample makes PAC-CLAD and the installer jointly liable for 20 years, caps total repair cost at the original installed price, and leaves workmanship leaks in the first 2 years with the installer alone. To qualify, the roof needs PAC-CLAD panels and flashings, PAC-CLAD HT underlayment or an approved equal, and an approved installer.
Petersen’s 2022 residential brochure and some retail listings still quote a 30-year finish warranty. Rapid Materials’ November 2026 product page, for example, shows “30yr Manufacturer’s Warranty” in its shipping box and “35 Year Warranty” in the specifications, so ask for the dated warranty form that matches your color and substrate before you order.
PAC-CLAD color chart: 28 standard colors with SRI values
The PAC-CLAD color availability chart lists 28 standard colors, 11 extended lead time colors, 7 premium and metallic finishes (Weathered Steel appears in both of the last two lists), 5 wood grains, 13 ore finishes, 3 anodized finishes and clear-coat Galvalume Plus. The ore table names 13 finishes even though the text above it says 16. Petersen states that most colors are rated by the Cool Roof Rating Council; check any product ID in the CRRC Rated Products Directory.
| PAC-CLAD color | Initial reflectivity | Emissivity | 3-year reflectivity | SRI | Source |
|---|---|---|---|---|---|
| Bone White | 0.70 | 0.86 | 0.69 | 85 | PAC-CLAD chart, Nov 2026 |
| Stone White | 0.69 | 0.86 | 0.67 | 84 | PAC-CLAD chart |
| Sandstone | 0.48 | 0.87 | 0.48 | 55 | PAC-CLAD chart |
| Slate Gray | 0.41 | 0.87 | 0.37 | 45 | PAC-CLAD chart |
| Medium Bronze | 0.30 | 0.88 | 0.29 | 31 | PAC-CLAD chart |
| Charcoal | 0.30 | 0.87 | 0.30 | 31 | PAC-CLAD chart |
| Dark Bronze | 0.27 | 0.86 | 0.29 | 26 | PAC-CLAD chart |
| Forest Green | 0.10 | 0.88 | 0.10 | 5 | PAC-CLAD chart |
| Black | 0.05 | 0.90 | 0.04 | 0 | PAC-CLAD chart |
| Galvalume Plus (clear acrylic) | 0.68 | 0.14 | 0.55 | 57 | PAC-CLAD chart |
Availability is the second filter. Black, Bone White, Dark Bronze and Medium Bronze are listed in every gauge on the chart, from 24 gauge steel to .063 aluminum, while Burnished Slate, Classic Bronze, Graphite and Inkwell are listed in 24 gauge steel sheet and 20 in coil only. One chart row looks like a typo: Cityscape shows 0.05 initial reflectivity with a 0.50 three-year value and SRI 57, so confirm its CRRC listing before using it for a cool roof credit. For color pairing across brands, see our metal roof colors guide.
PAC-CLAD prices and where to buy
Petersen does not publish panel list prices; contractors order through a local PAC-CLAD rep, distributor or one of the five facilities, found with the PAC-CLAD rep locator. Flat sheet is the one product with public retail pricing: Rapid Materials, an online distributor, listed 24 gauge PAC-CLAD sheets at $130.99 per 48 in x 120 in sheet in November 2026.
| PAC-CLAD 24 ga flat sheet, 48 x 120 in (40 sq ft) | Price per sheet | Price per sq ft | Source |
|---|---|---|---|
| Standard and extended colors (Bone White, Dark Bronze, Charcoal and others) | $130.99 | $3.27 | Rapid Materials, as listed November 2026 |
| Metallics (Silver, Champagne, Copper Penny, Anodic Clear) | $136.79 | $3.42 | Rapid Materials |
| Weathered Zinc | $159.97 | $4.00 | Rapid Materials |
| Galvalume Plus (clear acrylic, no paint) | $73.61 | $1.84 | Rapid Materials |
Freight changes the math on small orders. Rapid Materials ships PAC-CLAD sheets by LTL freight in 7 to 10 business days from Elk Grove Village, adds a $100 crate fee and $0.70 per mile with a $300 minimum, and treats all PAC-CLAD sales as final.
| Worked example (Roofing Brief arithmetic) | Inputs | Result |
|---|---|---|
| 10 standard-color sheets for trim and flashing | 10 x $130.99 + $100 crate + $300 minimum freight | $1,709.90, or $4.27 per sq ft for 400 sq ft of sheet |
| Snap-Clad panel count, 40 ft eave | 40 ft x 12 in / 16 in panels | 30 panels; 27 if 18 in panels are used |
| Tite-Loc clip count, 30 panels (16 in) on a 20 ft eave-to-ridge run | (20 ft x 12 in / 30 in) + 1 = 9 clips per panel | 270 clips at the ESR-4173 W-1 spacing |
| Installed standing seam, 2,000 sq ft roof | $9 to $20 per sq ft (our 2026 cost page) | $18,000 to $40,000 before tear-off and decking repairs |
The installed range comes from our standing seam metal roof cost guide, which also cites HomeAdvisor’s standing seam cost page at a $19,000 national average. No public source prices PAC-CLAD installs separately, so ask each bidder to name the profile, gauge, clip spacing and ESR-4173 system number on the quote.
PAC-CLAD insulated metal panels and their disadvantages
PAC-CLAD’s insulated metal panel (IMP) line has 7 profiles: Corr-Lok, Design-Lok, Max-Lok, Mesa-Lok, Mesa-Lok HSE, Ridge-Lok and Shadow-Lok. Mesa-Lok, which Petersen calls its most widely used IMP, comes 2 to 6 in thick, 8 to 53 ft long, in 26, 24 or 22 gauge skins, with a poured polyisocyanurate core rated R-8 per inch nominal.
The main disadvantages are cost, a fixed R-value and repair scope. A 3 in Mesa-Lok panel is about R-24 nominal and cannot be topped up later, a dented skin means replacing a full panel up to 53 ft long, and IMP envelopes ran $19 to $45 per sq ft installed in the 2026 guide cited in our insulated metal roof panels guide. The IMP finishes also differ from single-skin PAC-CLAD: Mesa-Lok lists polyester, siliconized polyester, low-gloss PVDF and Plastisol, with its own color guide, so the 35-year single-skin finish warranty does not carry over automatically.
PAC-CLAD vs Drexel Metals, Metal Sales and Englert
PAC-CLAD competes most directly with other contractor-sold architectural panel makers whose published paint warranties run 20 to 45 years. The table compares owner, flagship profiles and published paint warranty terms from each maker’s documents dated 2023 to 2026, without ranking them; the right brand is the one whose tested assembly matches your slope, deck and wind zone.
| Brand | Owner | Standing seam examples | Published paint warranty | Source |
|---|---|---|---|---|
| PAC-CLAD | Carlisle Companies | Snap-Clad, Tite-Loc Plus, PAC-150 | 35 yr standard PVDF; 10 to 20 yr on Cardinal Red and Award Blue | PAC-CLAD forms dated 1/1/2025 |
| Drexel Metals | Carlisle Companies (sister brand) | DMC 175S | 35-year Gold Standard paint warranty on qualifying installed projects (Drexel product guide) | Drexel product guide; 175S data sheet |
| Metal Sales Manufacturing | Cornerstone Building Brands since September 15, 2025 | Magna-Loc, Vertical Seam, Image II | 20 to 45 yr, not transferable | Our Metal Sales review |
| Englert | Great Day Improvements since June 17, 2024 | Englert standing seam series | 35 to 40 yr on ULTRA-Cool low-gloss Kynar 500 | Our Englert review |
Where PAC-CLAD stands out on paper is the depth of public documentation: separate warranty forms for each color family, a current ICC-ES report for four roof profiles, 21 Miami-Dade NOAs and a color chart with SRI for every standard color. Where it is weaker for homeowners is access: panels move through contractors and distributors, and Petersen publishes no panel price list.
How to spec a PAC-CLAD roof or wall
A PAC-CLAD job goes smoothest when the panel, assembly and warranty are fixed before bidding. Petersen’s own 2026 WTW process sheet sets out the order for warranted roofs, and the same order works for any roof.

- Measure the slope. Below 2:12, rule out Snap-Clad and Snap-On and choose Tite-Loc, Tite-Loc Plus or PAC-150 180 degree, all evaluated to 1/2:12 in ESR-4173 Table 3.
- Check the distance to salt or brackish water. Inside 2,800 ft of a seacoast or 600 ft of a canal, specify .032 or .040 aluminum with stainless clips, because the Galvalume finish warranty excludes those sites.
- Get the design uplift pressure for corner and edge zones from the engineer or plan reviewer, then pick an ESR-4173 Table 2 system whose allowable psf exceeds it, such as W-1 at 127 psf.
- Pick a color from the chart in the gauge you need, and confirm SRI and lead time; extended lead time colors such as Berkshire Blue ship on longer schedules.
- For a weathertightness warranty, send full drawings to Petersen’s Project Review Manager before bidding, start installer approval early, and expect field inspections with a written report within 5 business days of each visit.
- After install, remove strippable film right away, fill in the finish warranty PDF with the installation date, and keep invoices, since claims require the PAC-CLAD order and invoice numbers and proof of payment.
Which PAC-CLAD product should you pick?
Match the profile to slope, wind exposure and budget first, then color. The thresholds below come from ESR-4173, Petersen spec sheets and the warranty forms cited above.
| If your project is | Pick | Why |
|---|---|---|
| A home roof at 3:12 or steeper, no HVHZ | Snap-Clad, 24 ga steel, 16 in | No seamer needed; UL 90 on steel to 18 in; 2:12 minimum |
| A low-slope roof from 1/2:12 to 2:12 | Tite-Loc Plus | 180 degree seam, 1/2:12 in ESR-4173, FM Approved on purlins in 12 and 16 in widths |
| A coastal roof inside 2,800 ft of salt water | .032 or .040 aluminum Tite-Loc Plus or Snap-Clad with stainless clips | Aluminum form keeps 25 yr substrate coverage with twice-yearly rinsing |
| In Miami-Dade or Broward (HVHZ) | Tite-Loc Plus, Snap-Clad or PAC-150 with a matching NOA | 90 degree Tite-Loc has no Miami-Dade NOA in November 2026 |
| A curved or barrel roof | Snap-On (9 ft minimum radius) or PAC-150 and Tite-Loc (20 ft) | Radii published on each product page |
| Residential siding or an accent wall | Board and Batten or 7.2 Panel | Board and Batten has a Miami-Dade NOA; 7.2 is in ICC-ES ESR-5839 |
| A shop or barn wall on a budget | 7/8 in Corrugated or R-36 | Exposed fasteners, 36 to 37.33 in coverage, 5 ft minimum lengths |
| A red or blue roof | A standard color other than Cardinal Red or Award Blue | Those two carry 10-year fade coverage instead of 35 |
Frequently asked questions
Is PAC-CLAD aluminum?
PAC-CLAD is not only aluminum. The brand covers painted aluminum from .032 to .063 in, anodized aluminum up to .125 in, 24 and 22 gauge Galvalume steel, copper and zinc. The maker is called Petersen Aluminum because it began in 1965 as an aluminum distributor. Steel panels use AZ50 Galvalume and aluminum panels use ASTM B209 sheet, per ICC-ES ESR-4173.
Is PAC-CLAD a Carlisle company?
Yes. Carlisle Companies agreed on December 10, 2018 to buy Petersen Aluminum, the maker of PAC-CLAD, for about $197 million, and Petersen’s history page says the purchase closed in 2019. ICC-ES lists Petersen as a division of Carlisle Architectural Metals, and Drexel Metals is a sister Carlisle brand. The 2026 weathertightness warranty is issued by “PAC-CLAD, A Carlisle Company.”
What are the disadvantages of insulated metal panels?
Insulated metal panels cost more up front, about $19 to $45 per sq ft installed for IMP envelopes in a 2026 contractor guide. Their R-value is fixed by core thickness, about R-8 per inch for PAC-CLAD Mesa-Lok, a dented skin means replacing a whole panel up to 53 ft long, and their paint systems and warranties differ from single-skin panels.
What are the best brands for standing seam metal roofs?
No independent body ranks standing seam brands. Contractor-sold makers with public evaluation reports and dated warranty forms include PAC-CLAD (Petersen), Drexel Metals, Metal Sales, Englert and McElroy Metal. Compare them on the tested assembly for your slope and wind zone, the finish warranty term for your color, and whether a local installer is approved for that maker’s weathertightness warranty.
Where can I buy PAC-CLAD near me?
PAC-CLAD panels are sold through contractors, distributors and Petersen’s five facilities in Elk Grove Village, Illinois; Baltimore, Maryland; Tyler, Texas; Acworth, Georgia; and Phoenix, Arizona. The PAC-CLAD rep locator on pac-clad.com finds the rep for your area. Flat sheet is also sold online, for example $130.99 per 24 gauge 4 by 10 ft sheet at Rapid Materials in November 2026.
How long is the PAC-CLAD warranty?
Standard PAC-CLAD PVDF colors carry a 35-year non-prorated finish warranty for chalk, fade and film integrity, on forms dated January 1, 2025. Substrate coverage is 25 years on Galvalume and 30 years on inland aluminum. Cardinal Red and Award Blue get 10 years on fade, and a separate 20-year weathertightness warranty is available on qualifying roofs.
How many colors does PAC-CLAD offer?
The November 2026 PAC-CLAD color chart lists 28 standard colors, 11 extended lead time colors, 7 premium and metallic finishes, 5 wood grains, 13 ore finishes and 3 anodized finishes, plus clear-coat Galvalume Plus. SRI runs from 0 for Black to 85 for Bone White. Not every color is made in every gauge, so check availability.
What is the PAC-CLAD 7.2 panel?
The PAC-CLAD 7.2 Panel is an exposed-fastener roof and wall panel with 1-1/2 in ribs on 7.2 in centers and 36 in coverage. It comes in 24 and 22 gauge steel and .032, .040 and .050 aluminum, from 5 ft long up to 30 ft in steel or 22 ft in aluminum, and it is covered by ICC-ES evaluation report ESR-5839.